Page 67 - RAIDO PORTFOLIO 2021
P. 67
RAIDO PRODUCT PORTFOLIO
INDUSTRIAL LUBRICANTS
RAIDO Rock Drill Oil 32 ISO 6743/11 P This oil can be used in an air-piping or micro-fog lubricator of
NS-B.33.01 hammers, pile driver drills, grinders, pumps, hoists, clamps and
vices.
RAIDO Rock Drill Oil 46
NS-B.33.02
RAIDO Rock Drill Oil 68
NS-B.33.03
RAIDO Rock Drill Oil 100
NS-B.33.04
RAIDO Cutting Fluid Extra Herbert Corrosiontest IP 125 (10%): 0/0-0 In general a 10% emulsion (add 1 part oil to 9 parts water while
NS-B.08.01 stirring thoroughly) to obtain a very stable emulsion, gives a good
cooling lubricant for drilling, turning and cutting of normal
commercial steels.
N.B.: The product must be stored inside and above 0 °C; because of
stability limited to one year.
RAIDO Cutting Fluid HSU This cutting oil can be used for machining or grinding of ferro- This high quality emulsifying, semi-synthetic cutting fluid can be
NS-B.09.02 and non-ferro metals, especially aluminium and has a wide used for several universal applications in metalworking.
application area. This product provides excellent tool
operating times. This cooling fluid is also applicable in
combination with relative hard water.
N.B.: Mixing is achieved by slowly pouring the fluid into
water, preferably of drinking water quality, while stirring
thoroughly or using an automatic mixing device. In this way
optimal operation of the emulsion is achieved. Always mix
well before use.
Mixing ratio: Depending of the water hardness and the
applied machining process the below mentioned mixing ratio
are advised:
· General machining 1 part liquid in 19 - 24 parts water
· Heavy machining 1 part liquid in 12 - 19 parts water
· Grinding 1 part liquid in 24 - 32 parts water
PAGE 67