Page 215 - 2022-23 Auto Performance Drag Racing

Part No.
Description
Replace factory inner wheel wells to
accommodate larger rear tires, nar-
rowed rears, and frames. Available
in aluminum or steel, “tubs” incorporate
a Pittsburgh seam for easy assembly and are
beaded for a professional appearance. Shipped unassembled.
Part No. Description
Fuel Door Kit CCE4492
Fuel door kit is 6" x 6".
Pro Adjustable Rear Spoiler
DRAG RACING
Shifter Mount CCE5800
Mustang Mini Tub Kit CCE3687 NEW!
Designed to allow adding large
rear tires to late model Ford Mus-
tangs, mini tub kit is formed from
.024" steel. Kit is half moon- cut
and formed with a rolled edge,
and flats are Pittsburgh seemed
for a tight, professional fit. Kit is
complete with additional filler plates and instructions.
Wheel Wells
Shifter mount will fit on any crossmem-
ber, driveshaft loop, or frame rail. Most shifters can be adapted to the 1/8" x 4" x 12" mild steel plate. Made from 1" x .058" material. Sleeve and
pin are included for quick shifter removal.
Nitrous Bottle Mounts
Unfinished steel brackets are offered in several configurations to securely mount a nitrous bottle.
CCE5500
Dual 10-lb. Nitrous Bottle Mount, Stand Up
CCE5500A
Dual 15-lb. Nitrous Bottle Mount, Stand Up
CCE5501
Single 10-lb. Nitrous Bottle Mount, Stand Up
CCE5501A
Single 15-lb. Nitrous Bottle Mount, Stand Up
CCE5502
Dual 10-lb. Nitrous Bottle Mount, Lay Down
CCE5503
Single 10-lb. Nitrous Bottle Mount, Lay Down
CCE3681
CCE3681
23" x 40" x .040" Aluminum, Pair
CCE3682
23" x 40" x .024" Steel, Pair
CCE3685
28" x 45" x .040" Aluminum, Pair
CCE3686
28" x 40" x .040" Aluminum, Pair
Parachute Release Cable Kit
Install a chute release mechanism in any car with this kit which includes 18' long PTFE-lined Felsted cable, stainless steel field clamp, and mounting hardware.
CCE7600
CCE8080
Compensate for chang-
ing track conditions
with this 60" long x 16"
wide universal spoiler.
Fabricated from .063" alu-
minum, it may be easily
trimmed for a custom fit. Includes fasteners, adjustable strut rods, quick pins, aluminum brackets, and instructions.
CCE5500
Part No.
Firewall Kits
Description
CCE7600
Parachute Release Cable Kit
CCE7600-3
Flat Cable Mount Only, 1/8" Thick Mild Steel, 3/16" Holes
Universal firewall kits, offered
in .040" aluminum or .024" steel, are 60"
wide and 24" tall with a steel cowl cap and
A-pillar caps. Replace factory firewalls or use in tube chassis cars. Easily trimmed to fit most cars.
Part No.
Description
CCE8011
CCE8011
Pro Adjustable Rear Spoiler
CCE8016
Additional Strut Rods for Wing, Each (Does Not Include Quick- Release Pins)
CCE8016-1L
LH Wing Strut Rod Mounting Kit
CCE8016-1R
RH Wing Strut Rod Mounting Kit
Part No. Description
Related Component
Aluminum Dash Board CCE8030
Universal dash board is fabricated from .040" aluminum and is 60" wide to fit any car. Dash board is easily trimmed to fit and includes end caps to finish.
Transmission Tunnel Kits
Universal transmission tunnel
kits, offered in .040" aluminum
or .024" steel, will fit most chassis
and transmissions. Includes right and left
side tunnel halves (28"W x 30"L), driveshaft cover (28"W x 36"L), and matching floor pieces.
Parachute Frame Mount CCE7601
Strong and simple mount attaches parachute to virtually any chassis. In- cludes hardware and tubing. Welding required.
CCE8080
Aluminum Firewall Kit
CCE8081
Steel Firewall Kit
CCE8035
Aluminum Firewall Flange Kit, Allows Tunnel Removal for Transmission/Clutch Access
Parachute Pack Mount
CCE7602
CCE7603
Part No. Description
Part No. Description
CCE8020
Mounts parachute far enough away
from the rear of the car to clear wings or spoilers. Includes a quick-release pin and post for quick and easy removal of the chute pack for trunk access. Requires welding.
CCE7602
Parachute Pack Mount
CCE7603
Round Tube Parachute Pack Mount (Unwelded)
CCE8020
Aluminum Transmission Tunnel Kit
CCE8021
Steel Transmission Tunnel Kit
213
2022-23