Page 216 - 2022-23 Auto Performance Drag Racing

DRAG RACING
Swing-Out Side Bar Kit CCE3214
Ease driver entry and exit. Kit
includes quick-release mecha-
nism, which allows door bar to be
swung open and shut while maintaining legality for racing.
Roof Mount Tow Kit CCE4617
Removable hook is easily installed and will eliminate front end damage.
Weld-In Subframe Connectors
Use subframe connectors on uni-body cars to prevent chassis flex and twist. Connectors are formed from mild steel and can be welded in to tie the front and rear subframes without any modifications to the stock floor or other compo- nents.
Battery Mount Kit CCE3712
Install just about any battery in tube chassis or cars with modified rear frame sections. Kit installs with little or no modification. Round tube design is light, yet very strong.
Bus Bar CCE1027
Simplifies race car wiring when hooking up multiple hot leads or grounds.
Remote Master Switch Linkage
CCE3713
Kit mounts
master disconnect switch inside the body,
on the frame, where it can be activated
with an aluminum push/pull linkage fitted
with a T-handle. The aluminum rod can be shortened to fit any location. Complete with hardware.
Funny Car Cage Conversion
Convert conventional roll cage to a fun- ny car-style cage for increased protec- tion. Kit includes pre-bent, extra-long chrome moly or mild steel tubes to fit virtually any chassis or application. A specialized window net is available for funny car cages.
Part No.
Description
CCE3640
1967-69 Camaro/Firebird
CCE3641
1970-81 Camaro/Firebird
CCE3643
1975-79 Nova
CCE3644
1964-73 Mustang
CCE3646
1968-74 Nova
CCE3647
1979-93 Mustang
CCE3648
1993-02 Camaro/Firebird
CCE3650
“A” Body Mopar, 108" W.B.
CCE3651
1968-76 Chrysler “B” Body
CCE3653
“E” Body Mopar
CCE3655
1962-67 “B” Body Mopar
CCE3657
1994-99 Camaro/Firebird
CCE3640
CCE4023
Part No.
Roll Bar Angle Finder CCE9600
Description
Four-Link Rear Suspension Packages Stage I - “Top Gun” Four-Link Suspension CCE3512
Kit includes upper shock cross- member, Strange Engineering externally adjustable alumi- num coil-over shocks, shock mount brackets, lower shock mounts, bolt-on diagonal link, four-link, chrome moly rod ends, and hardware.
Specify spring rate when ordering. See page 217 or more information regarding coil-over springs.
Stage II - “Pro” Four-Link Suspension and Subframe Kit
CCE3625
“Top-of-the-line” four
-link kits are for all
GM, Ford, and Chrysler
intermediate and full-
size cars and trucks. Kit
features standard “Pro”
four link. Ideal for cars
that run in excess of
200 MPH, kit includes
upper shock crossmember, mandrel bent 2" x 3" frame rails with factory-welded brackets, dropped front crossmember, quick-release driveshaft loop, bolt-on diagonal link, four links, adjustable lower shock mounts, Strange single-adjustable aluminum coil-over shock absorbers, chrome moly rod ends, and hardware. Specify spring rate when ordering. See page 217 for more information regarding coil-over springs.
CCE4023
Funny Car Cage Conversion, 1-5/8" x .083" Chrome Moly
CCE4024
Funny Car Cage Conversion, 1-5/8" x .134" Mild Steel
CCE4030
Funny Car Window Net, 10-3/4" x 22" x 19", Black
CCE4031
Funny Car Window Net Mount
Aids the roll bar/
cage installation
process by de-
termining the proper angle that tubing needs to be bent. Simply adjust tool to the desired angle and transfer to pipe for bending.
Pro Street Side Bar Kit CCE3213
Pro Street side bars are pre-bent to ease entry and exit. For
roll bar equipped cars. NOT NHRA/IHRA legal for competition use and
DO NOT provide the
same safety benefits
as competition bars,
but do offer a limited
amount of safety and provide some support for the main hoop. Made from 1-3/4" x .134" wall tubing and sold in pairs.
214
2022-23