Page 217 - 2022-23 Auto Performance Drag Racing

Ladder Bar Rear Suspension Packages
Stage I - Basic Ladder Bar Suspension
A basic ladder bar suspension for all-out race cars or street/strip vehicles. Kit includes double adjustable “Pro” ladder bars
with spherical rod ends
and safety brackets,
bolt-on diagonal link or
weld-on Panhard bar.
Available with 1-3/4"
round, or 2" x 3" box crossmember.
Part No. Description Stage II - Ladder Bar Suspension
Stage II Kit is the same as Stage I with a choice of Strange Engineer-
ing adjustable aluminum
coil over shocks or Chassis
DRAG RACING
CCE3635
Heavy Duty Pro Four-Link Kit CCE3514
Four-link kit includes 1/4"
thick steel frame and hous- ing brackets, 1" x .156" wall directly threaded four-link tubes, 1-3/8" housing bracket lateral support tube, hous-
ing bracket boxing strips, and instructions. Rod ends must be purchased separately.
Pro-1 Double Adjustable Ladder Bars CCE3605 NEW!
All inclusive Pro-1
kit allows upgrad-
ing suspension for
increased traction
and adjustability.
Kit is complete with
32" double-adjustable
ladder bars with 360° brackets
integral shock mounts bottom mounted
adjusters, 1/4" thick housing brackets, bracket boxing strips, necessary hardware, and instructions.
CCE3627
Basic Ladder Bar Suspension with Round 1-3/4" Crossmember
CCE3635
Basic Ladder Bar Suspension with Box 2" x 3" Crossmember
Engineering coil-over shocks.
Also includes coil-over springs,
shock mounts, and shock mount
crossmember.
Specify spring rate when ordering. See page 217 for more information regarding coil-over springs.
Double Adjustable Pro Ladder Bars
Adjustable 32" ladder bars consist of 1" dia. mild steel tubing, with high-quality spherical
rod ends, front and
rear rod end safety
brackets, and an
adjustable lower link on
the bottom bar. Sold in pairs.
Part No. Description Outlaw “Triple” Adjustable Ladder Bars
Ideal for heavy, high-horsepower race cars, ladder bars allow adjust-
ment of instant center height,
pinion angle, and overall
CCE3633
Part No.
Description
CCE3633
Stage II Ladder Bar Suspension with Chassis Engineering Coil- Over Shocks
CCE3634
Stage II Ladder Bar Suspension with Strange Eng. Coil-Over Shocks
Stage III - Ladder Bar Suspension and Subframe CCE3628
Chassis Engineering’s
most complete ladder
bar suspension includes
upper shock crossmem-
ber, adjustable lower
shock mounts, double
adjustable “Pro” ladder
bars, bolt-on diagonal
link, quick-release
driveshaft loop, Strange
Engineering coil-over shock absorbers and mandrel bent 2" x 3" frame rails with factory-welded brackets. System will accommodate the largest wheel tubs as well as dual rear- mount batteries and a fuel cell.
Specify spring rate when ordering. See page 217 for proper coil-over spring selection.
"Top Gun" Four Link Kit CCE3505
CCE3607
CCE3607
Double Adjustable Pro Ladder Bars
CCE3610
Replacement Ladder Bar Adjusters, Pair
leverage. Frame brackets
have five instant center
height adjustments. Built
from 1-3/8" x .095" chrome
moly steel, ladder bars include laser-cut 1/4" thick housing brackets, rod ends, and hardware. Sold in pairs.
Part No. Description Misalignment Rod Ends
Made for applications where misalignment is a
CCE3606
CCE3606
Outlaw “Triple” Adjustable Ladder Bars
CCE3721
Shock Mount Brackets for CCE3606
Designed for big inch, nitrous-inject-
ed, and supercharged race cars that
run over 200 MPH. The lightest and
strongest four link available from
Chassis Engineering. Kit includes 1-1/4" and 1-3/8" dia. bars, rear end brackets with 360° placement option, and a cross brace for additional strength.
NOTE: Kit does not incorporate shock mounting brackets and does not include rod ends.
problem.
Part No.
Description
CCER/ECB-8-101
1/2" LH Misalignment Rod End
CCER/ECM-8-101
1/2" RH Misalignment Rod End
215
2022-23