Page 510 - 2022-23 Auto Performance Drag Racing

T3 Series Dry Sump Oil Pumps
DRAG RACING
The best-performing dry sump pumps
ever produced by Moroso, T3 Series
pumps utilize tri-lobe scavenge sec-
tions with individual timing gears for
proper clearance at high RPM’s. Aluminum-bodied pumps weigh close to 50% less than traditional gerotor pumps and take up to 40% less horsepower to drive. Offered in single-, 3-, 4-, and 5- stage versions for door car applications. Sold complete with necessary fittings and mounting brackets.
Dry Sump Breather Tanks
Well suited for use as a remote breather/oil separator for dry sump oil tanks, aluminum tanks are 3-1/8" diameter x 6-1/2" tall (less breather). Tanks include non-hooded breather and mounting bracket.
Part No. Description
2.5-Qt. Dry Sump Breather Tank MOR85466
Large 2.5-qt. capacity tank eliminates the need for two tanks, while dual -12AN fittings allow hooking up dry sump pump and vacuum tank. Lightweight aluminum tank is 3" diameter x 17-1/2" tall, includes drain cock, non-hooded breather, and mounting bracket.
Vacuum Pump Breather Tanks
Lightweight aluminum tanks may be used with Moroso racing vacuum pumps or solely as a breather tank/catch can for engine or transmis- sion. Tanks are 3-1/8" dia. x 11-1/2" overall and include a clamp-on style breather and petcock for draining. Choose from tanks with a single -12AN or (2) -10AN male fittings 180° apart.
Part No. Description
Breather Tank MOR85467
Tank is popularly used on applications using dry sump pumps, vacuum pumps, or engines that have “pushed oil” with other breather tanks. Spun aluminum tank is 10-1/4" tall x 3-1/8" diameter and includes -12AN male side fitting and a -8AN drain plug. Sold complete with billet aluminum panel mount clamp.
Poly Breather Tanks
Lightweight, polyurethane crankcase breather/catch tanks have 2" breathers up top, are 3-1/8" dia. x 10- 1/2" tall, and offered with -6AN or -10AN male fitting. May be mounted using MOR63401 bracket.
Part No. Description
Chevy Billet Aluminum Oil Pumps
Failures from vibration and fatigue are elimi- nated with large oil passages and a mounting boss cross-section three times larger than stock. Choose between traditional spur gear
or gerotor designs. Both are compatible with stock intermediate shafts and mounting studs.
Part No. Description
MOR85469
Breather Tank, (2) -12AN Male Fittings, 180° Apart
MOR85470
Breather Tank, 3/8"NPT Inlet
MOR85473
Breather Tank, (2) 3/8"NPT Bungs, 180° Apart
Part No.
Description
MOR22341
Single-Stage Oil Pump
MOR22343
3-Stage Oil Pump
MOR22344
4-Stage Oil Pump
MOR22345
5-Stage Oil Pump
Dry Sump Pulleys and Accessories
Gilmer-style pulleys are machined
from billet aluminum that is hard
coat anodized for added durability. Pul-
leys have a 3/8" pitch and fit 5/8" diameter shafts.
MOR23532
Part No.
Dry Sump Oil Tanks
Description
MOR23560
MOR23528
Dry Sump Pump Pulley, 28-Tooth
MOR23532
Dry Sump Pump Pulley, 32-Teeth
MOR23560
Belt Guide, .062" Thick, 2.50" O.D. x 1.00" I.D.
MOR23561
Belt Guide, .062" Thick, 3.00" OD. x 1.00" ID
MOR97110
Gilmer Drive Belt, 60-Teeth, 22.5"L x 1"W
MOR97120
Gilmer Drive Belt, 64-Teeth, 24" L x 1" W
MOR97130
Gilmer Drive Belt, 68-Teeth, 25.5" L x 1" W
MOR97140
Gilmer Drive Belt, 72-Teeth, 27" L x 1" W
MOR97170
Crankshaft Pulley, 1" Wide, 16-Teeth
MOR97171
Crankshaft Pulley, 1" Wide, 17-Teeth
MOR85465
Vacuum Pump Breather Tank, (1) -12AN Male Fitting
MOR85468
Vacuum Pump Breather Tank,
(2) -10AN Male Fittings 180° Apart! NEW!
Engineered for drag racing, fabricated aluminum 7" diameter dry sump tanks are available with or without integral breather tanks. Tanks are fitted with large diameter, screw-on billet aluminum caps with O-rings for easy service. Five and six- quart capacities.
Part No.
Description
MOR22683
5 Qt. Dry Sump Oil Tank, 12.86" Tall, (3) -12AN Fittings, (1) -12AN Breather Fitting,
Use with MOR85465 or MOR85466 Breather Tank
MOR22687
6 Qt. Dry Sump Oil Tank with Integral Breather Tank, 14.86" Tall, (1) -16AN Fitting
MOR22689
6 Qt. Dry Sump Oil Tank with Integral Breather Tank, 14.86" Tall, (3) -12AN Fittings
MOR22677
Straight Extended Tank Mount, 5.25" from Flange to Saddle Base
In-Line Screened Oil Filter MOR23860
MOR85402
Poly Breather Tank, -10AN Male Fitting
NEW!
MOR85406
Poly Breather Tank, -6AN Male Male Fitting
Lightweight aluminum oil filter
installs in oil system scavenge
lines, preventing debris from en-
tering dry sump pump and oiling
system components. Filter which includes -12AN male fittings and features a cleanable, 304 stainless steel screen.
Filter Fitting
Fitting includes a stainless steel screen to trap metal par- ticles before they reach the pump or engine. Ideal for dry sump tanks, etc. Sold individually.
Part No. Description
MOR22171
SB Chevy, Spur Gear Design, Fits 8-1/4" Deep Oil Pans
MOR22163
BB Chevy, High Volume, Fits 8" Deep Oil Pans
MOR22164
BB Chevy, Std. Volume, Fits 8" Deep Oil Pans
MOR22167
BB Chevy, Professional Gerotor Design, Includes Intermediate Shaft and Mounting Stud
MOR23960
Filter Fitting, 3/4"NPT to -12AN
MOR23961
Filter Fitting, -12AN to -12AN
MOR23962
Filter Fitting, -16AN to -16AN
508
2022-23