Page 759 - 2022-23 Auto Performance Drag Racing

Tandem Master Cylinder WIL260-4893
DRAG RACING
Durable housing with large-capacity
plastic reservoir. Dual outlet 1-1/16" bore
utilizes stock components. Factory-style
mount hole pattern and outlet thread size. Optional universal mounting bracket kit with push rod and dust boot available. Ideal for many drag racing or pro-street cars.
Part No. Description
High-Volume Aluminum Master Cylinders
Master cylinders have 26% more fluid capacity and include formed steel lids, bellows type gaskets, internal slosh baffles, and
standard mounting dimensions.
Knob-Style Proportioning Valves
Brake Flexline Kits
Stainless steel braided kits include fittings,
are application specific and should be used when installing a Wilwood disc brake kit. Provides improved braking when compared to rubber brake hoses.
Part No.
XR Racing Brake Fluid NEW!
Description
WIL220-6419
Honda Civic, 1990-99 With 240mm Rotors
WIL220-6471
Ford Mustang, 1986-93, Front, Fits WIL140-4503, WIL140-6154, WIL140-6156,
and WIL140-7589 Disc Brake Kits
WIL220-7056
Chevy Camaro/Chevelle/Nova, 1964-72, Front,
Fits WIL140-7019, WIL140-2285, WIL140-1017, and WIL140- 7675 Disc Brake Kits
WIL220-7699
Chevy Belair, 1955-57, Front, Fits WIL140-3425, and WIL140-7676 Disc Brake Kits
WIL220-11382
2010-14 Chevy Camaro, Front, 16" Long
WIL220-11237
Universal Kit, 3/8"-24 To 90°, 22" Long NEW!
WIL220-5247
Replacement Tube Adapter Fitting, 3/16" x 1/2"-20
WIL220-5248
Replacement Tube Adapter Fitting, 3/16" x 9/16"-20
WIL250-3677
Bracket Adapter Kit; Master Cylinder to Single Brake Pedal
WIL260-4894
Tandem Kit; Master Cylinder, Boot, Push Rod, and Retainer
WIL260-4896
1-1/16" Master Cylinder Rebuild Kit
WIL330-15080
Replacement Plastic Screw-On Cap, Each
Description
Master Cylinder Part No.
Rebuild Kit Part No.
Replacement Lid and Gasket
3/4" Bore Master Cylinder
WIL260-6764
WIL260-6898
WIL330-13945
7/8" Bore Master Cylinder
WIL260-6765
WIL260-6899
WIL330-13945
1" Bore Master Cylinder
WIL260-6766
WIL260-6900
WIL330-13945
Description
16.9-Oz.Can
1 Case (4) 16.9-oz. Cans
16.9 Oz. (12) Cans
Adjustable proportioning valves
feature a fine-threaded adjuster for
precise pressure adjustments from
100-1,000 PSI. Unit can deliver up to 57% reduction in
line pressure, the highest of any proportioning valve currently available. Compact, lightweight assemblies have dual mount- ing holes to ease installation. May be used to adjust front to rear, side to side, or single wheel brake bias.
Formulated using a proprietary blend of polymer electrolytes and borate esters, polyglycol-ether- based brake fluid has the lowest compressibility, lowest moisture affinity, and highest resistance to aeration of any fluid currently offered. Fluid has a dry boiling point of 645° and is formulated to provide the most consistent pedal feel, even when exposed to rigorous racing conditions. Sold in 16.9-oz. cans, or in cases of four or 12.
XR Racing Brake Fluid WIL290-16353 WIL290-16354 WIL290-16355 NOTE: Fluid is not DOT-approved; for off-highway use only.
Hi-Temp 570°F Racing Brake Fluid
WIL290-0632
Fluid has a minimum dry boiling point of 570°F, over 150°F higher than DOT 3 requirements and over 100°F higher than DOT 4 requirements. Low- viscosity fluid allows easy brake bleeding, while problems with aeration and foaming are eliminat- ed. 12-oz. container.
EXP 600 Plus Super Hi-Temp Racing Brake Fluid
WIL290-6209
Low-viscosity brake fluid was developed to with- stand the high heat and extreme pressure of rac- ing. Rating of 626°F far exceeds minimum DOT3 and DOT4 requirements. Fluid provides solid pedal feel, immediate response, high heat protection, and maximum service life. 16-oz. container.
Swing Mount Clutch/Brake Pedal Assembly
WIL340-13574
Swing-mount pedal assembly accepts a single
brake or master cylinder in the reverse posi-
tion, inside the firewall. Unit includes a light-
weight aluminum frame with forged, 6:1 pedal
ratio arm. Assembly accepts any Wilwood
vertical-mount, single or tandem-outlet master
cylinder. Horizontal-mount flange master cylinders require an adapter kit. Master cylinder must be purchased separately.
Part No.
Residual Pressure Valves
Description
WIL260-8419
Knob-Style Proportioning Valve, 1/8”-27 Ports
WIL260-12627
Knob-Style Proportioning Valve, M10-1 Ports
Valves prevent fluid drain-back in systems
where master cylinder is mounted below
floor. Also prevent excessive piston retrac-
tion in disc brake systems for firmer pedal and reduced pedal travel. Aluminum housing is tapped for 1/8" NPT on inlet and outlet for easy installation. Use 2 lb. valve for disc brakes and 10 lb. for drum brakes. Includes 1/8" NPT inlet and outlet ports and 1/8" NPT to 3/8"-24 brake line adapters.
Part No. Description
Quick Check Gauge WIL260-0966
Easily read gauge (0-1,500 PSI) provides quick line pressure reading for accurate master cylinder and brake bias set up. Es- sential for troubleshooting brake system.
WIL260-13706
2 lb. Blue, Disc Brakes
WIL260-13707
10 lb. Red, Drum Brakes
WIL260-13783
2 lb. Blue With Fittings, Disc Brakes
WIL260-13784
10 lb. Red With Fittings, Drum Brakes
757
2022-23