Page 93 - 2022-23 Auto Performance Drag Racing

DRAG RACING
Suspension
Adjustable Upper Ball Joints
With mono-ball joints, upper control arm angles can be adjusted. Joints include plate, ball, tapered shaft, adjuster bushings and nut.
Part No.
Replacement Parts
Ball Joint Sleeves
ALL56267 Description
ALL56260
ALL56212 (K6117)
Ball joint fits Impala spindle. Can be used to raise the roll center on Street Stock or Modified cars. Base O.D. is 1.975". Replaces AFCO 20038-1. 2" taper per foot.
ALL56218 (K6145)
Ball joint fits popular full-size 1977- 89 Impala spindles. Also fits 1971-81 Camaro and 1973-88 Chevelle/Mal- ibu. Base O.D. is 2.090". Replaces AFCO 20039. 2" taper per foot.
Ball Joint Adapter Sleeve
ALL56256
Adapter sleeve is ideal for modifying stock style
Chevelle lower control arms to accept a screw-in
style ball joint. Adapter sleeve has an O.D. of 2.010", to take the place of a press-in style ball joint (ALL56210), allow-
ing for installation of a screw in style ALL56214 with a 1.5" taper/ft. pin or ALL56049 with a 2" taper/ft. pin ball joint. Note: Modifications to control arms may be necessary for proper fit of sleeve. Sleeve must be welded to the control arm after installation.
ALL56260
LH Large GM Joint (ALL56204 Style)
ALL56261
RH Large GM Joint (ALL56204 Style)
ALL56265
RH Mid-Size GM Joint (ALL56220 Style)
ALL56267
Adjustable Screw-In Upper Ball Joint (ALL56214 Style)
ALL56262
Stud For ALL56260, ALL56261 and ALL56267
ALL56266
Stud For ALL56264 and ALL56265
ALL99098
Replacement Mono Ball Bearing 5/8"
Steel sleeves allow custom fabrication
of control arms.
Part No.
Screw-In Lower Ball Joints
ALL56216 (K727)
ALL56250
Description
ALL56250
Small Screw-In ALL56214/ALL56217 (K772/K719)
ALL56251
Large Screw-In ALL56216 (K727)
ALL56252
Large Press-In ALL56206 (K6141)
ALL56253
Med. Press-In ALL56212 (K6117)
Fits Lefthander chassis style lower control arm or where a large screw-in type ball joint is required. Replaces AFCO 20036. 1-1/2" taper per foot.
ALL56217 (K719)
Compatible with stock lower control arms modified with ALL56250 weld-in threaded sleeve. 1-1/2" taper per foot.
Press-In Lower Ball Joints
ALL56206 (K6141)
Ball joint fits most tubular lower control arms and 1971-76 Impala. Taper fits most fabricated and Impala spindles. Base O.D. is 2.190". Re- places AFCO 20038. 2" taper per foot.
ALL56210 (K5103)
Popular ball joint fits 1964-72 Chevelle and 1967-69 Camaro. Base O.D. is 2.015". Replaces AFCO 20033. 1-1/2" taper per foot.
Low Friction Lower Ball Joints
Low friction economical OEM ball joints are high performance units designed for smooth suspension travel. Some ball joints are available with longer than stock pin length for correcting roll centers. Ball joints have hardened pins with stock type housings and are not rebuildable. Legal for classes that require non-take apart ball joints. For off-road use only.
Part No. Type
Length
Taper Per Ft.
Replaces ALL56216 (K727)
ALL56030
Screw-In
Standard
1-1/2"
ALL56031
Screw-In
1/2" Longer
1-1/2"
ALL56216 Housing with ALL56206 Pin
ALL56034
Screw-In
Standard
2"
ALL56035
Screw-In
1/2" Longer
2"
ALL56214 Housing with ALL56206 Pin
ALL56049 †
Screw-In
Standard
2"
ALL56050 †
Screw-In
1/2" Longer
2"
ALL56051 †
Screw-In
1" Longer
2"
Replaces ALL56210 (K5103)
ALL56042
Press-In
Standard
1-1/2"
ALL56210 Housing with ALL56206 Pin
ALL56027
Press-In
Standard
2"
ALL56028
Press-In
1/2" Longer
2"
ALL56029
Press-In
1" Longer
2"
Replaces ALL56212 (K6117)
ALL56044
Press-In
Standard
2"
Replaces ALL56218 (K6145)
ALL56046
Press-In
Standard
2"
ALL56047
Press-In
1/2" Longer
2"
ALL56048
Press-In
1" Longer
2"
† Commonly used with ALL56256 ball joint adapter sleeve.
91
2022-23