Page 69 - DRAGO GT Operators Manual

Section 7 – Lubrication/Maintenance

7.5 – Every 20 Hours of Operation

Danger: Before lubricating or performing
maintenance on any part of the corn head,
engage the feeder house lift cylinder
safety stops, set the parking brake, turn
off the combine engine and remove the
key and hang a warning sign on the
operator’s platform. Failure to do so
could result in serious injury or death.

7.5.1 – 20 Hour Grease/Lubricate

Stalk Rollers

Every 20 hours of operation lubricate the stalk roller
lower bearings (A). It is recommended to grease the
corn head at the end of the day when the stalk rollers
are warm. Fill until clean grease is seen pushing out of
the stalk roller.

Lubricant Type:
Mobilux EP 0 Grease

Folding Tow Shaft Coupler (folding heads only)

Every 20 hours of operation lubricate the folding tow
shaft coupler (A).

Lubricant Type:
Mobilux EP 0 Grease

Important: Pump the grease into the zerks
until it is seen leaking out. This coupler holds
a significant amount of grease.

Page | 67