Page 18 - QT13442_STI001_CASE_DAEMO_ERKAT

OPTIONAL EQUIPMENT
OPERATOR ENVIRONMENT HYDRAULICS ATTACHMENTS
FOPS cab top guard – Level 2 Auxiliary hydraulics: Arm – 7 ft 10 in (2.40 m)
Front grill guard – 2 x 2 screen mesh Single acting/joystick activated Coupler/Case multi-pin grabber
Front rock guard: Double acting/joystick activated Buckets:
Multi-function/joystick activated Heavy-duty
Vertical bars – two piece/OPG 1 Extreme-duty
Front rock guard: Secondary low-flow/joystick activated Load holding control
Vertical bars – fixed/one piece/OPG 2 Free swing – order kit through Service Parts
UNDERCARRIAGE
Vandal guard Hose Burst Check Valve – HBCV
23.6 in (600 mm) rubber shoes
Rain deflector
23.6 in (600 mm) steel shoes, triple semi-
Sun visor grouser
Side-view camera 27.6 in (700 mm) steel shoes, triple semi-
grouser

BUCKETS
Application Width SAE Heaped Capacity
3
General Purpose 24 in (0.61 m) to 48 in (1.22 m) 0.65 yd (0.50 m ) to 1.53 yd (1.17 m )
3
3
3
3
Heavy-duty 24 in (0.61 m) to 48 in (1.22 m) 0.64 yd (0.49 m ) to 1.51 yd (1.15 m )
3
3
3
3
3
3
3
Extreme-duty 24 in (0.61 m) to 42 in (1.07 m) 0.58 yd (0.44 m ) to 1.19 yd (0.91 m )
3
3
Heavy-duty coupler 24 in (0.61 m) to 39 in (0.99 m) 0.55 yd (0.42 m ) to 1.03 yd (0.79 m )
3
3
3
Ditching 60 in (1.52 m) to 66 in (1.68 m) 1.08 yd (0.83 m ) to 1.20 yd (0.92 m )
3
3
3

CaseCE.com

©2017 CNH Industrial America LLC. All rights reserved. CASE is a IMPORTANT: CASE Construction Equipment Inc. reserves the right CASE Construction Equipment is biodiesel-
trademark registered in the United States and many other countries, to change these specifications without notice and without incurring friendly. NOTE: All engines meet current EPA
owned by or licensed to CNH Industrial N.V., its subsidiaries or any obligation relating to such change. Availability of some models emissions regulations. All specifications are
affiliates. CNH Industrial Capital is a trademark in the United States and equipment builds vary according to the country in which the stated in accordance with SAE Standards or
and many other countries, owned by or licensed to CNH Industrial equipment is used. The illustrations and text may include optional Recommended Practices, where applicable.
N.V., its subsidiaries or affiliates. Printed in U.S.A. Contains 10% equipment and accessories and may not include all standard
post-consumer fiber. equipment.Your CASE dealer/distributor will be able to give you Always read the Operator’s Manual before
operating any equipment. Inspect equipment
details of the products and their specifications available in your area.
before using it, and be sure it is operating
properly. Follow the product safety signs and
Form No. CCE201701CX245DSR use any safety features provided.

CX245D SR 7 of 7