Page 5 - Colour levels 2 to 10
P. 5

Health and safety (Continued).  Client mixtures:

 Always wear rubber gloves whilst using hair dye on either clients or testing   Mix one tube of permanent hair dye with 75 mls of 6% hydrogen peroxide
 strips. Do not mix the hair dye formulas in enclosed areas, always use well   for a (whole head application).

 ventilated or open spaces.

     Mix a half tube of permanent hair dye with 37.5 mls of hydrogen peroxide
 Optional precautions would be to wear a face mask and protective glasses   for a (roots application).

 whilst bleaching and colouring hair.

     When applying a hair dye for the first time. Apply hair dye to the middle
 Hydrogen peroxide strengths:  lengths and ends wait 20 minutes. Then mix half a tube with 6% and apply

 Hydrogen peroxide is manufactured in different strengths and labelled as   to the roots and comb through. Leave for another 20 minutes. Then

 either volumes or percent. The table below is a conversion table displaying   shampoo out and blow dry. The reason behind this 2 part application is

 volumes translated into percent.  Keratinisation, as the hair grows away from the scalp; approximately after 6
     weeks in the atmosphere the hair begins to harden. This is Keratinisation, it

                   10 volume     =   3%  takes longer to penetrate and remove pigments. The first six weeks growth

                   20 volume     =   6%  (roots) remains soft and the pigments are removed almost immediately.
                   30 volume     =   9%  Please see Fig 3.

                   40 volume     =   12%         Fig 3.

                   60 volume     =   18%

                   100 volume   =   30%



 PerfecTress Colour College only works with hydrogen peroxide in the

 European measurements (percent). In particular only 6% and 9% are the
 only strengths used for bleaching or colouring. Thereby, ensuring no

 chemical damage to the hair from either process,



 When permanently colouring hair:

 Mix with 6% for the same base shade; or one shade lift.

 Mix with 9% for two shades lift.



 i.e.




 To colour base shade 6 to a 6.1 use 6%.
 To colour base shade 6 to a 5/ 4/ 3/ 2/ 1 use 6%.

 To colour base shade 6 to a 7.1 use 6%.

 To colour base shade 6 to a 8.1 use 9%.



 It is not possible to lift a permanent darker colour with a permanent lighter
   1   2   3   4   5   6   7   8