Page 48 - Delco Sales - 2022 Irrigation Playbook Draft 1

spec
P.O. Box 368, Union, NJ O7O83-O368, 9O 8-687-781O, 8OO-327-2443, Fax: 9O8-687- 2 7 2 2

P7267D-Rev 5

P O W E R C A B L E
INSULATION: H I G H D I E L E C T R I C P V C

J A C K E T : P V C

S I Z E S : 8 - 500 MCM Stranded Copper Conductors

U L L I S T E D T Y P E TC 600 VOLTS THHN (PVC/NYLON)

VW-1 RATED, 90°C DRY, 75°C WET PVC Jacket

1.0 S C O P E : 2 . 2 Insulation:
1 . 1 This specification covers two, three and four HIGH DIELECTRIC POLYVINYL CHLORIDE
conductor cables having VW-1 THHN/ UL-83 table 13.1 (THWN 75°C)
THWN (PVC/Nylon) conductors with an
overall polyvinyl chloride (PVC) jacket, UL-83 table 14.1 (THHN 90°C)
conforming to Article 318 "Cable Trays" THICKNESS UL-83 table 21.5
and Article 340 "Power and Control Cable
Type TC" of the 1981 National Electrical 2 . 3 Insulation Armor:
Code, and Subject 1277 of Underwriters
Laboratories, inc. Meets the requirements of NYLON UL-83 paragraph 35.1
the 70,000 BTU "Cable Tray Propagation THICKNESS UL-83 table 21.5
Test" per IEEE-383 and shows reserve
capabilities by also passing the 210,000 2 . 4 Cable Assembly:
BTU flame test. Rated 600 volts, 90°C dry SIZES 8 THROUGH 4/0 AWG
and 75°C wet. Three or more conductors are assembled
round with fillers as needed. A tape binder
1 . 2 Use: is applied over the assembly. Two
UL listed and OSHA acceptable. conductors are assembled flat parallel
Recognized for use in Class 1, Division 2 (round, with fillers as needed, is available
hazardous locations and for installation in upon request.)
trays, wireways, troughs, channels, ducts, SIZES 250 THROUGH 500 MCM
and conduit. Specifically approved for direct Conductors are assembled round with fillers
burial, wet or dry locations and outdoors in as needed. A tape binder is applied over
cable trays where a sunlight resistant rating the assembly.
is required. Designed to supply power to
motors, or for connection to other power 2 . 5 Overall Jacket:
devices. Deep well submersible pump. Polyvinyl chloride UL-62 part 22 class 12
Thickness specified herein
2.0 C O N S T R U C T I O N :
2 . 1 Conductors: 2 . 6 Color Code:
Bare, soft annealed copper per ASTM B-3 Black insulation with ICEA method 4 printed
SIZES 8 THROUGH 2 AWG color code (See color code table on back.)
Concentric stranded, class B (7 strands) 2 . 7 Markings:
ASTM B-8 and UL-83 table 4.1 Ink print on jacket "(size) AWG Type TC
SIZES 250 THROUGH 500MCM THHN or THWN cdrs. Sunlight Resistant
Concentric stranded, class B (37 strands) 600V (UL) Direct Burial". Indent print on
ASTM B-8 and UL-83 table 4.1 other side of jacket "(number of conductors)"

2 . 8 Construction Options:
Consult factory for cable specifications with
ground wire.

11//05