Page 15 - Foton Workshop Manual - Aumark (BJ1099)

INTRODUCTION - GENERAL RULES OF MAINTENANCE OPERATION 01-9

DANGER:
Torque inspection must be carried out according to the lower limiting value of torque
requirements.
• When using the sealant, sometimes it needs to wait for a period of time until the 01
sealant is solidified.
(d). Gasket.
• Add seal ring on the gasket so as to avoid oil leakage, as needed.
(e). Bolts, nuts and screws.
• In strict accordance with the specified tightening moment of force, use the torque
wrench to tighten up.

(f). Fuse.
•When replacing fuse, always conform
whether the rated current of new fuse
meets the requirements, never use the
fuse of which rated current does not
conform to the requirements.

Figure Symbol Part name Abbreviation

Fuse F

Fuse F/L

(g). Buckle
The common dismounting method of buckles used for the body parts is shown in
the following table

WARNING:
If the buckle is damaged in the process of maintenance, always replace it with a new one.

Page 15