Page 1502 - Workshop Manual - Aumark (BJ1051)

75-2
Door lock-Door lock

Replacement

Hint:

The replacement steps for left and right door lock are same because they are symmetric.
1. Ignition switch: ON (carry out this operation if the vehicle is equipped with power
glass regulator)
2. Regulate the (left) front window glass to its highest position.
3. Ignition switch: OFF
4. Disconnect the negative pole cable of
battery
Hint:
z Please turn off ignition switch and
lighting switch, and loose terminal nut
completely when the battery cable is
connected and disconnected. Do not
prize up the cable during the operation.
z Do not keep the key inside of vehicle if
the vehicle is equipped with central
control lock before the negative pole
cable is disconnected, so as not to lock
the door.
5. Disassemble the outside trimming plate assembly of (left) door (refer to “Chapter 77
Inner/Outer trimming part-Replacement”)
6. Disassemble the rain-proof curtain of (left) door.
7. Disassemble the outside handle of
75
(left) front door lock
(a). Take away the tie rod outside handle of
(left) front door lock from the side of
outside handle of (left) front door lock as
shown in the Figure.

Page 1502