Page 27 - Workshop Manual - Aumark (BJ1051)
P. 27
01-21
Introduction-How to Troubleshoot the Vehicle
5. DTC/BC check
Whether a DTC / BC occurs?
Yes > Diagnose and troubleshoot the malfunction represented by the
DTC/BC.
No > Go to step 6.
6. Symptom identification
Whether a symptom exists?
Yes > Go to step 7.
No > The system is OK.
Tip:
If a DTC is displayed in initial DTC/BC inspection, it indicates that harnesses or connectors in this
circuit section may be malfunctioning. Then, please check related harnesses or connectors. (Refer to 01
“Chapter 01 Introduction-How to Troubleshoot the Vehicle, Inspection Procedures for Circuits”.)
7. Performing trouble diagnosis and troubleshooting using symptoms chart
Page 27
