Page 9 - Workshop Manual - Aumark (BJ1051)

01-3
Introduction – indentification information

(c) If an installation procedure is the reverse order of the corresponding removal procedure,
only important parts are described.
(d) The maintenance procedures in this manual only describe important parts. In addition,
illustrations are used to represent operation objects and items. In procedure descriptions,
details of operating procedures, standard values, and precautions for operations are set forth.
(e) Some similar models in this manual may share same illustration. In such a case, the relevant
content may differ from practical situation.
(f) An operating procedure shows itself in the following forms:

• Operating procedure illustration shows “What to do” and “Where to do”.
• Operating procedure heading shows “What to do”.

• Operating procedure description shows “How to do” and provides other information
including “Maintenance specification” and “Warning”.
Example:

Operating procedure illustration
01
Operating procedure heading
Operating procedure description

13. Connecting left front wheel hub with
brake drum
(a) Tighten the 6 nuts to connect left front
wheel hub with brake wheel.
Torque
Vehicle mode Torque
1051 Series 250～300 N·m
1051 Series 396～465 N·m
1051 Series 396～465 N·m
Notice
Maintenance specification information
Be sure to replace with new nuts.
(b) Perform thread sealing at 3 places on
Maintenance warning message
each nut in order to prevent looseness.

ٛ
ٛ
ٛ

Page 9