Page 7 - Safety Plus_Catalogue
P. 7
LOCKOUT TAGS
OSHA STANDARD “TUFF-TAGS”
Manufactured from a double layer of high impact styrene and resistant to water and oil with a brass eyelet to take a shackle diameter of up to 8mm.
These reusable tags easily pass the 50lbs “pull force” required by OSHA and offer a double sided, easy to write and clean surface.
Supplied in packs of 10
REVERSE ON RLTT50 - RLTT53
RLTT50 RLTT51 RLTT52 RLTT53
Description
Size: 5½” (140mm) x 2¾” (70mm)
Lockout safety tag/Pack 10 Please call us if you would like a bespoke version creating.
PERSONALIZED ID TAGS
These personalized tags are printed on both sides with our standard
notice. Your employee name and photograph are added to the print
which clearly shows who is working on the isolated equipment.
Size: 4 /2 x 3” (115 x 75mm).
1
To order, simply email us your photographs and names
Code Description
PTG01 Personalized ID Tag Front Back
TWO PART ISOLATION TAG
Our 2 part isolation tag is ideal for more complex isolations where traceability is important.
After parts 1 and 2 are filled in, part 1 is attached to the isolation point. Part 2 is detached
and returned back to the responsible person as confirmation of isolation. Both parts of the tag
have areas for tag and permit numbers which can be entered onto the permit to work, again
to aid traceability.
Once the job is complete, both parts can be filed with the permit as a long term record of the
work. Alternatively if used with a dry wipe marker, both parts can be cleaned ready for re-use.
Parts 1 and 2 are pre-scored to allow easy separation by hand.
Combined size: 10 /8 x 4” (265mm x 100mm)
3
Supplied in packs of 50
LOCKOUT TAGS
Material: PVC
Code Description
ISTAG50 Pack of 50 Isolation Tags
RWPT01 Water based non-permanent pen
RWPT02 Oil based permanent pen
T +234 805 777 8800 email info@safetyoneplus.com www.safetyoneplus.com T +234 805 777 8800 email info@safetyoneplus.com www.safetyoneplus.com 7