Page 20 - Confined Space Catalogue

Gas Detection - Single Gas

Gas Detection - Single Gas and Accessories

CROWCON GASMAN
Gasman is a range of rugged, compact single gas personal monitors designed for use in the toughest
environments. Its stunningly compact and lightweight design makes it ideal for use in industries such as oil and
gas, chemical plants and waste and water works.

• Weight: 130g
• Tough polycarbonate housing - water and dust resistant to IP65
• Full overmoulding - high impact resistance
• 2 levels of instantaneous alarm and TWA alarms for toxic versions
• 95dB audible alarm
• Vivid twin red/blue visual alarm - if ambient noise is high, Gasman alerts you by vibrating and with the high
impact blue/red LED alarms
• Real-time TWA and peak display options
• Fully interchangeable intelligent sensor modules
• One button operation - quick and easy to use
• Backlit LCD display for gas diagnostics and operating status - easy to read
• Data and event logging are available as standard, and there is a built-in 30 day advance warning when
calibration is due
• Rechargeable versions for all gas types – charger purchased separately - 12 hour run time
• Non-rechargeable versions for oxygen and toxic gases
Rechargable Battery Gas
CRGS-AA-A-001-G CRGS-AA-B-001-G CH Methane - LEL% 0-100%
4
CRGS-AG-A-001-G CRGS-AG-B-001-G O Oxygen - 0-25% Vol
2
CRGS-AI-A-001-G CRGS-AI-B-001-G H S Hydrogen Sulphide 0-100ppm
2
CRGS-AH-A-001-G CRGS-AH-B-001-G CO Carbon Monoxide 0-500ppm
CRGS-CS-A-001-G CRGS-CS-B-001-G CO Carbon Monoxide 0-500ppm H Filtered
2
CRGS-AN-A-001-G CRGS-AN-B-001-G Cl Chlorine 0-20ppm
CRGS-AR-A-001-G CRGS-AR-B-001-G NH Ammonia 0-100ppm
3
CRGS-CK-A-001-G CRGS-CK-B-001-G CIO Chlorine Dioxide 0-1ppm
2
CRGS-HG-A-001-G CRGS-HG-A-001-G CO Carbon Dioxide IR (Safe Area Only)
2
CROWCON GASMAN ACCESSORIES
• External filter - for use in high dust environments
• Flow cap assembly - to enable calibration or manual gas sampling
• Aspirator assembly - for drawing gas samples
• Shoulder strap - which can be combination with the chest harness plate enable the detector to be worn over
the shoulder
• Chest harness strap kit - consists of two straps (harness plate not included)
• Chest harness strap kit including harness plate
• Leather carry case - enables unit to be worn either on a belt or with a shoulder strap
• Hard hat clip - to enable Gasman to be attached to a safety helmet
• Single way multi-regional power supply
Code Description
CRC02132 Gasman External Filter
CRM04581 Flow Cap Assembly
CRC01937 Aspirator Assembly
CRC01843 Shoulder Strap
CRC01844 Chest Harness Strap Kit excluding harness plate
CRC011304 Chest Harness Strap Kit including harness plate
CRC01983 Leather Carry Case
CRC01953 Hard Hat Clip
Gas Detection - Single Gas The ACOP 2014 explains the importance of retesting;
CRC011318
Multi-regional power supply

“Where the atmosphere in the space may not be safe to breathe and requires testing, the findings
of the risk assessment should indicate whether testing should be carried out on each occasion that
the confined space is re-entered, even where the atmosphere initially was found to be safe to breathe.

is being carried out, particularly where there is a known potential for adverse changes during the work.”

20 Regular monitoring may be necessary to ensure that there is no change in the atmosphere while the work