Page 211 - 25268

#
#25268-EYAL - 25268_pnim_eyal | 7 - B | 18-05-15 | 13:58:39 | SR:-- | Black 25268-EYAL - 25268_pnim_eyal | 7 - B | 18-05-15 | 13:58:39 | SR:-- | Yellow 25268-EYAL - 25268_pnim_eyal | 7 - B | 18-05-15 | 13:58:39 | SR:-- | Magenta 25268-EYAL - 25268_pnim_eyal | 7 - B | 18-05-15 | 13:58:39 | SR:-- | Cyan

Appendix
Guidance and manufacturer’s declaration - electromagnetic emissions
The Product is intended for use in the electromagnetic environment specified below. ELECTROMAGNETIC COMPATIBILITY (EMC)
The customer or the user of the Product should assure that it is used in such an
environment.

Electromagnetic Changes or modifications to this product not expressly approved by the
IEC 60601
Immunity tests Compliance level environment - manufacturer may result in increased emissions or decreased immunity
Test level
guidance performance of the product and could cause EMC issues with this or
other equipment. This product is designed and tested to comply with
Floors should be
Electrostatic applicable regulations regarding EMC and shall be installed and put into
discharge (ESD) wood, concrete or service according to the EMC information stated as follows.
ceramic tile. If
+/- 6 kV contact +/- 6 kV contact floors are covered
with synthetic
+/- 8 kV air +/- 8 kV air material, the Warning
relative humidity Use of portable phones or other radio frequency (RF) emitting
should be at least equipment near the product may cause unexpected or adverse
IEC 61000-4-2
30 %. operation.
Power frequency Warning
magnetic fields The product must not be used adjacent to, or stacked with, other
Power frequency should be at levels equipment. If adjacent or stacked use is necessary, the product must
(50/60Hz) 3 A/m 3 A/m characteristic of a be tested to verify normal operation in the configuration in which it is
magnetic field typical location in a
IEC 61000-4-8 typical commercial being used.
or hospital
environment.
Note
UT is the a.c. mains voltage prior to application of the test
level.

216/222 B ML PXEM DFU PRT / Rev.11 / 02-2018 (Old ZF 1902118.X) B ML PXEM DFU PRT / Rev.11 / 02-2018 (Old ZF 1902118.X) 213/222

Y-MK1-853