Page 124 - Arch binder

Operable Partitions PART 2 - MODEL 2020 PRODUCT SPECIFICATION
10 22 26 (10650)
2.05 FINISHES

2.01 ACCEPTABLE MANUFACTURER A. Finish Material Type: Panel fi nish material shall be Class A rated
(except wood veneer and high pressure laminate) in accordance
A. Operable walls shall be Series 2000, Model 2020 Individual with ASTM E 84, consisting of (select):
Panels / Multi-Directional as manufactured by 1. Vinyl: consisting of Type II, reinforced vinyl weighing 21 oz./
KWIK-WALL Company. lin. yd. (651 g/lin. m). Upgrade Vinyl shall meet or exceed
2.02 PANEL CONSTRUCTION CCC-W-408A and CFFA-W-101-D quality standards
A. Panel Dimensions: Standard panel dimension shall be a 2. Optional Upgrade Fabric: consisting of fade and tear resistant
nominal 3" [76] thick. fabric that resists water-based stains weighing 13 oz./lin. yd.
(403 g/lin. m).
B. Panel Frame: Vertical steel frame members shall be minimum
18-gauge galvanneal steel, horizontal top cross member shall be 3. Optional Basics Carpet: consisting of acoustically absorbent,
minimum 12 - gauge galvanneal steel, which meets or exceeds ASTM non-woven needle punch fi bers fused to prevent fraying and
A 653 requirements frame shall be all-welded construction with unraveling of material weighing 28.5 oz./lin. yd. (884 g/lin. m).
steel corner supports and cross-bracing reinforcements. Panel frame Basics Carpet shall achieve a minimum NRC (Noise Reduction
shall be Class A rated fi re retardant, non-combustible and Coeffi cient) rating of .20 (applied over gypsum substrate)
non-corrosive in accordance with ASTM E 84. accordance with ASTM C 423.
C. Panel Skins: Panel skins shall be Class A rated (except Wood 4. Optional Upgrade Carpet: consisting of acoustically absorbent,
Veneer and High Pressure Laminate) in accordance with non-woven needle punch fi bers fused to prevent fraying and
ASTM E 84. Panel skin material shall consist of (select): unraveling of material weighing 23 oz. / lin. yd. (713 g / lin.
m). Upgrade Carpet shall achieve a minimum NRC (Noise
1. Standard Acoustical Substrate: consisting of structural
acoustical substrate pressure laminated to both sides of the Reduction Coeffi cient) rating of .25 (applied over gypsum
steel frame to form a rigid, unitized and structural panel. substrate) in accordance with ASTM C 423.
2. Optional Steel Skins: consisting of minimum 22-gauge tension- 5. Optional Wood Veneer: consisting of unfi nished fl at cut
leveled galvanneal steel, pressure laminated to a structural wood veneer laminated to 1/2" [12.7] thick particle board
acoustical backer and mechanically joined to the steel frame to core. Veneer shall be book / running matched within a
form a rigid, unitized and structural panel. panel, and vertically edge banded if Trimless astragals
are specifi ed.
3. Optional Wood Veneer: consisting of particle board core covered (Notes: Optional Class "A" rated particle board is available.
with wood veneer and pressure laminated to both sides of the Acoustical substrate STC ratings apply for Wood Veneer panel
steel frame to form a rigid, unitized and structural panel. construction.)
4. Optional High Pressure Laminate: consisting of particle board 6. Optional High Pressure Laminate: consisting of general
core covered with general purpose plastic laminate and purpose plastic laminate pressure bonded to 1/2" [12.7]
Phenolic backer sheet, which is pressure laminated to both sides particle board core, and vertically edge banded if Trimless
of the steel frame to form a rigid, unitized and structural panel. astragals are specifi ed.
D. Panel Weight: Maximum panel weight shall be 6.5 - 11.0 lb./ft. (Note: Acoustical substrate STC ratings apply for High Pressure
2
(32 - 54 kg/m ) depending on STC rating, size and options Laminate panel construction.)
2
selected.
MODEL 2020 PRODUCT GUIDE
2.03 OPERATION Optional Steel Skin Construction
A. Operation shall be Individual Panels with a Multi- Directional STC Panel Thickness Max. Panel 2 Maximum Maximum
track system that allows the panels to negotiate 90° "X", "L" and Rating (nominal) Weight lb./ft. Panel Height Wall Width
"T" intersections as required for movement of panels from storage 49 3" [76] 10.9 [53kg/m ] 16' - 2" (4.93 m) Unlimited
2
location(s) to various installed positions. Panels shall be top
2
supported by two (2) carriers featuring dual horizontal precision 51 3" [76] 11.0 [53.7 kg/m ] 16' - 2" (4.93 m) Unlimited
bearings with high strength polymer tires riding on a structural
aluminum track. *Note: Optional Wood Veneer or High Pressure Laminate only available as
Acoustical Substrate Construction
2.04 STACK ARRANGEMENTS MODEL 2020 PRODUCT GUIDE
A. Stack Type: Panel storage confi guration shall be (select): Standard Acoustical Substrate Construction
1. Standard Perpendicular Stack: consisting of panels stacked STC Panel Thickness Max. Panel Maximum Maximum
perpendicular to the wall's installed position. Rating (nominal) Weight lb./ft. 2 Panel Height Wall Width
2
2. Optional Parallel Stack: consisting of panels stacked parallel 42 3" [76] 6.5 [32 kg/m ] 16' - 2" (4.93 m) Unlimited
to the wall's installed position.
45 3" [76] 7.5 [36.6 kg/m ] 16' - 2" (4.93 m) Unlimited
2
3. Optional Remote Stack: consisting of panels located remotely
from the wall's installed position, as shown on submitted 49 3" [76] 9.0 [44kg/m ] 16' - 2" (4.93 m) Unlimited
2
shop drawings.
B. Stack Quantity: Panels shall be stored at one (1) or both ends in 50 3" [76] 9.0 [44kg/m ] 16' - 2" (4.93 m) Unlimited
2
separate stack areas as required for panel storage.
* Estimated panel weights are for intermediate panels. Weight may vary due to
substrate, size, or function of panel. Add 105 lbs [47kg] for pass door. Add 6 lbs [3kg]
per lin ft height for expanders. Add 3.5 to 8 lbs [1.6 to 3.6kg] per lin ft for track.
**Standard features can be modifi ed, contact your Kwik-Wall distributor for the
features you want.
*** Horizontal Splice: Heights over 14'2" [4.31] with Acoustical Substrate require a
structural splice.
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com 04-18