Page 53 - Arch binder

Operable Partitions
10 22 26 (10650) MODEL 3020 PART 2 - PRODUCT SPECIFICATIONS

6. Optional High Pressure Laminate: consisting of general purpose 3. Optional Automatic Bottom Seals: consisting of self-
plastic laminate pressure bonded to 1/2" [12.7] particle board activated seals providing 2" [50.8] of nominal travel.
core, and vertically edge banded if Trimless astragals are D. Horizontal and Vertical Panel Trim: All exposed panel trim
specifi ed. and hinges shall be of one (1) similar color (select):
(Note: Acoustical substrate STC ratings apply for High Pressure Laminate 1. Dark Bronze
panel construction.)
2. Grey
7. Optional Unfi nished: consisting of panels with exposed
acoustical substrate or steel skins for fi eld applied wall 2.07 CLOSURE SYSTEMS
covering or painting. A. Initial Closure System: The lead panel (the fi rst panel
B. Finish Material Supplier: Finish material shall be (select): exiting the stack) shall form a seal vertically against a rigid
1. Standard Factory Supplied: from manufacturer’s standard wall surface, as accomplished by a (select):
selection of fi nish materials, as specifi ed. 1. Standard Bulb Seal: consisting of continuous-contact,
fl exible inyl bulb seals installed along the vertical edge
2. Optional Customer Supplied: from customer’s selection of fi nish of the lead panel for positive compression against
material, by others, and as approved by KWIK-WALL Company. a rigid wall surface.
C. Finish Material Application: Finish material shall be (select): 2. Optional Fixed Starter Jamb: consisting of an aluminum
extrusion, which is permanently mounted to a structural
1. Standard Factory Applied: by KWIK-WALL's authorized
wall surface. The Fixed Starter Jamb shall incorporate
distributor. Customer supplied fi nish material samples must a tongue- and-groove-type vertical astragal for positive
be submitted to manufacturer for testing and approval prior interlocking with the lead panel.
to acceptance and application. 3. Optional Adjustable Starter Jamb: consisting of an
2. Optional Field Applied: by others. aluminum extrusion which is permanently mounted to
a structural wall surface and is fi eld-adjustable to
2.06 PERIMETER TRIM AND SEALS compensate for out-of-plumb conditions of the fi xed wall.
A. Vertical Trim and Seals: Panels shall have vertical astragals The Adjustable Starter Jamb shall incorporate a tongue-
containing fl exible vinyl seals and incorporate reversible and-groove-type vertical astragal for positive interlocking
tongue and-groove-type confi gurations for positive interlocking with the lead panel.
with adjacent panels. Vertical astragal type shall be (select): B. Final Closure System: The fi nal closure panel (the last panel
exiting the stack) shall form a seal vertically against a rigid
1. Standard Trimless Astragal: consisting of an aluminum wall surface. The type of fi nal closure panel shall be (select):
extrusion with tongue-and-groove-type vertical astragals. 1. Standard Expander Panel Closure: consisting of an
Vertical trim shall not be permitted on the panel faces, resulting expander mechanism with a nominal 5" [127] of travel,
in a minimal groove appearance between adjacent panels. activated from the face of the panel using a removable
2. Optional Cap-type Astragal: consisting of an aluminum wrench as supplied by manufacturer. The Expander
extrusion with tongue-and groove-type vertical astragals for Panel shall be equipped with an adjustable bottom seal
encapsulating and protecting the fi nish material and substrate (standard) or (optional) operable bottom seal, and a
along the vertical edge of the panel. fl ush pull handle.
2. Optional Hinged Panel(s) Closure: consisting of a panel
B. Horizontal Top Trim and Seals: Top seals shall consist of fl exible hinged Permanently and directly to a structural wall
vinyl sweep seals installed on both sides of the panel. The seals surface. The Hinged Panel(s) shall be equipped with
shall consist of a compressed bulb between two (2) fi ngers of an adjustable bottom seal, a lap-type extrusion for sealing
vinyl. Top seal type shall be (select):
against its adjacent panel (standard) or (optional) expander
1. Standard Fixed Top Seals: consisting of continuous-contact mechanism with a nominal 5" [127] of travel, and a fl ush
fl exible vinyl sealing against the bottom fl ange of the pull handle on each side of the panel.
overhead track. 3. Optional Pocket Door(s): (see “Series 3000 Pocket Door”
2. Optional Operable Top Seals: consisting of an edge-activated brochure for complete details and specifi cations).
seal using a removable wrench as supplied by KWIK-WALL.
1
Top seals shall provide a maximum / 2" [13] of travel. 2.08 ACOUSTICAL PERFORMANCE
(Note: Available only with Standard Operable Bottom Seals.) A. Certifi cation: The operable wall shall have been tested in an
C. Horizontal Bottom Trim and Seals: Bottom seals shall consist of independent acoustical testing laboratory in accordance with
multiple fi ngers of fl exible vinyl for positive contact and sealing ASTM E 90 and ASTM E 413 test procedures.
with various fl oor surfaces. Bottom seal type shall be (select):
B. STC Rating: The operable wall acoustical performance rating
1. Standard Operable Bottom Seals: consisting of an edge activated shall be based on (select):
seal using a removable wrench as supplied by KWIK-WALL. 1. Standard Steel Skins: with a standard rating of 52 STC, or
Bottom seals shall provide 2" [50.8] of nominal travel. optional ratings of 46 STC, 50 STC or 56 STC.
2. Optional Adjustable Bottom Seals: consisting of fi eld adjustable, (Note: Not available with optional Wood Veneer ot High Pressure
continuous-contact vinyl sweep seals with 2” [50.8] nominal Laminate.)
height with 3/4" [19] of nominal adjustment. 2. Optional Acoustical Substrate: with optional ratings of 43
STC, 46 STC, 48 STC or 50 STC.

4
04-18
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com