Page 81 - Arch binder

Operable Partitions
10 22 26 (10650) MODEL 3020 WT STACK ARRANGEMENTS

Standard Perpendicular Stack
Pocket Width Perpendicular stacking allows individual panels to be located at
one (1) or both ends and stored perpendicular to the wall’s
installed position.
* *

*
Stack Depth

* * Pocket Width Optional Parallel Stack
Note:
*** If optional double pocket doors w/ In contrast to perpendicular stacking, Individual Panel
expander closure is required minimum arrangements may also be stored parallel to the wall’s installed
* Stack Depth dimension is 2’-10" [864]. position, at one (1) or both ends.
[305] ***
1’-0"
[610] 2’-0" Min.

Optional Remote Stack
For more complex wall system layouts, or when space or other
room constraints dictate, Individual Panels may be located
remotely from the wall’s installed position.
Pocket Width
* *

*
Stack Depth

Stack Depth* Pocket Width**
The overall depth of the stack area, as required for panel storage, The width of the pocket is determined by the widest panel in the
is dictated by the total number of panels in the wall system. wall run. For specifi cation purposes, assume the widest panel is
KWIK-WALL’s Model 3020WT - Steel panels require an average 4'-0" (122cm) maximum. Wall systems that utilize Automatic type
stack depth of 4 / 4" [108] per panel. To determine the stack depth, bottom seals will require extra pocket width to allow clearance for
1
calculate as follows: the actuator that protrudes from the bottom of the lead panel.
Pocket width may be calculated as follows:
Number of Panels x 4 / 4" [108]
1
If Adjustable or Weight Transfer Operable Bottom
Seals are specifi ed:
*Note: Additional stack depth is required for wall systems
containing the following type of panels:
3
• Expander Panel Closure or Pass Door Panel: / 4" [19] Panel Width + 7" [178]
1
• Hinged Panel(s) Closure: 4" [102] (allows 3 / 2" [89] for hand clearance on each side)
• Pocket Door(s): 6" [152]
**Note: For wall systems that include Pocket Doors, please
reference KWIK-WALL’s “3000 Series Pocket Doors” brochure
for pocket layout dimensions and applications.

8
04-18
Dimensions in [ ] are millimeters. Contact your local distributor for additional assistance or visit www.kwik-wall.com