Page 16 - Fire Alarm-Submittal

VM-ETH Ethernet VM-DACT Dual Line Dialer Card provides dialer communications
between the VM-1 control panel and remote locations over telephone
Adapter Cards VM-CPU lines. Alarm, supervisory, and trouble information is transmitted to the
remote site using one or two telephone lines in dual or split format to any
Three optional Ethernet adapter cards Main Board desired receiver.
are available for VM applications. Each Voltage 24 VDC
of these provide specific features such Input power
as panel programming, diagnostics, and Supervisory 60 mA
status monitoring, as well as central sta- Active 95 mA
tion connectivity, and email or email-to- VM-ETH card Output 19.2 or 38.4 Kbps
text messaging capability. Output current 100 mA max.
Phone line One/two loop start line on public switched
Supported communications ETH1 ETH2 ETH3 telephone network, pulse, or DTMF dialing
Standard 10/100 Base-T Ethernet network (party, ground start, and PBX lines are not
connection for panel programming and • • • acceptable.)
diagnostics Modem V.32 bis 14.4 Kbaud
IP Dialer Communications • • Dialer protocol Contact ID
Email and Text Communications •
Wall connector Standard RJ-31X or RJ-38X phone jack
Line supervision
Each VM control panel supports up to eight IP services, which can provide connec- Trouble When on-hook line voltage < 10 V
tion to any combination of the following functions: Off-hook current < 10 mA
Programming
IP Dialer (IP-DACT) Telco compliance Communications Canada CS-03, FCC/CFR
Email 47 Part 68
FCC registration number EDWUSA-47115-AL-E
Each VM network supports up to:
100 Dialer Accounts, and; Operating environment
100 Email Accounts (up to 20 email addresses per account). Temperature 32 to 120°F (0 to 49°C)
Relative humidity 0 to 93% noncondensing
VM-ETH1, VM-ETH2, VM-ETH3 Specifications
See Ordering Information for adapter card functional descriptions
Ethernet 10/100 Base-T
Voltage 24 VDC
Current
Standby 42 mA
Active 54 mA at 24 VDC
Connection mode Auto negotiation
Wire runs
Distance 200 ft. (60 m) max. [Note 1]
Type Standard Cat 5 or Cat 5e
Connector RJ-45
IP address 192.168.001.003 (default)
Subnet mask 255.255.255.0 (default)
Default port ID 2501
Gateway 000.000.000.000 (default)
Operating environment
Temperature 32 to 120°F (0 to 49°C)
Relative humidity 0 to 93% noncondensing
Note 1: Panel to communication equipment

Page 8 of 10 DA T A SHEET K85005-0138
Not to be used for installation purposes. Issue 1