Page 44 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 120 Freitag, 7. April 2017 10:54 10

Axle Repairs
Wheel Hubs

KL-0045-7
KL-0045-7
Hydraulic Spindle (12t), M42x2

The KL-0045-7 is a hydraulic spindle with a maximum allowable force of 120kN
(=12t) designed to fit a wide range of GEDORE Automotive tools.
The base tool KL-0045-700 consist of a body made of high-grade steel, two internal
pistons, cup seals and various screw joints. The spindle is operated via a pressure
screw.
If the hydraulic spindle KL-0045-7 is combined with tools of the KL-0174-Series, the
Scope of Delivery: KL-0045-7 Hydraulic Spindle (12t), M42x2 adaptor KL-0174-552 (2¼"-14 UNS to M42x2) is additionally needed when the
perforated puller plates size 2 and size 3 are used.
Part No. Description Qty
KL-0045-700 Hydraulic Spindle (12t, Base Tool), M42x2 1
Technical Data:
KL-0045-7009 Pressure Piece, short 1
Maximum admissible force: 120kN (12t)
KL-0045-7020 Pressure Piece, long 1
Maximum stroke: 16mm
3 Thread of cylinder: M42x2
Length without ‘T’ Handle:
240mm
Weight: 2.3kg
KL-0040-2500
KL-0040-2500
Hydraulic Cylinder, 17t

Thanks to its special design as a hollow piston cylinder, the KL-0040-2500 hydraulic
cylinder (17t) can be used to perform pulling as well as pushing operations in
conjunction with the corresponding spindles available as accessories.
Technical Data:
Range of Use: Maximum admissible force: 170kN (17t)
In conjunction with various GEDORE Automotive tools, the Maximum stroke: 45mm
hydraulic cylinder (17t) KL-0040-2500 can be used for the removal Maximum oil pressure: 700bar
and installation of drive shafts, wheel hubs, wheel bearings, Maximum volume of oil: 122cm³
silentblocs and suspension ball joints. Piston area: 27cm²
Thread in hollow piston: M20
Note: Retaining thread (pushing side): 2¼“-14 UNS
A hydraulic pump is needed to drive the hydraulic cylinder KL-0040-2500.
For accessories such as coupling, hydraulic pump, pressure gauge etc., please Retaining thread (pulling side): M42x2
refer to chapter 4 in this Catalogue). Cylinder external diameter: 80mm
Cylinder overall length (piston retracted): 202mm
Cylinder overall length (piston extended): 247mm
Hydraulic fluid connection thread: 3/8“ NPT
Weight: 5.2kg

KL-0039-1930
KL-0039-1930
Pressure Spindle with O-Ring, M20x350

Technical Data:
Pin Ø: 20mm
Overall length: 350mm
Maximum load capacity: 20t

KL-0039-1935
KL-0039-1935
Thrust Piece

This tool is necessary for pressing out drive shafts. It is used in conjunction with the
KL-0174-.. Puller Series, the KL-0040-2500 hydraulic cylinder and the KL-0039-1930
pressure spindle with pin Ø 20mm.
KL-0174-856
KL-0174-856
Thrust Piece for Drive Shafts

Designed to press out drive shafts. Used in conjunction with the tools of the
KL-0174-.. Series and mechanical pressure spindles with a pin Ø of 14mm.

3.4-07 (120) Copyright GEDORE Automotive GmbH, Germany
formerly