Page 49 - LEŽAJEVI OSOVINE KLANN

Kapitel_3.fm Seite 125 Freitag, 7. April 2017 10:54 10

Drive Shafts

KL-0177-2 KL-0177-2
CV Joint Puller

Suitable for VW-Audi, Opel/Vauxhall, Jap. vehicles, etc.
Designed for the quick and easy removal of the outer constant velocity joint by
pulling it off the drive shaft. The operation can be performed in situ on the vehicle.
(Please note that on some vehicles it is not possible to pull off the constant velocity joint)
An essential tool when changing the rubber gaiter or CV joint. Different pull spindles KL-0177-205
are included in the kit to make the tool almost universal in its range of application.
Advantages:
• Substantial time savings.
• Eliminates risk of damage to components caused by hammers, chisels, etc.
• Universal application.
Scope of Delivery: KL-0177-2 CV Joint Puller
Part No. Description Qty 3
KL-0177-201 Press Frame 1
KL-0177-202 Clamping Jaw Set Ø, 19-34mm 1
KL-0177-205 Set of Pull Spindles 1
Scope of Delivery: KL-0177-205 Set of Pull Spindles
Part No. Description Qty
KL-0177-2051 Pull Spindle, M16x1.5 (female thread) 1
KL-0177-2052 Pull Spindle, M18x1.5 (female thread) 1
KL-0177-2053 Pull Spindle, M20x1.5 (female thread) 1
KL-0177-2054 Pull Spindle, M22x1.5 (female thread) 1
KL-0177-2055 Pull Spindle, M24x1.5 (female thread) 1
KL-0177-2056 Pull Spindle, M27x1.5 (female thread) 1
KL-0177-2057 Pull Spindle, M30x1.5 (female thread) 1
KL-0177-2061 Pull Spindle, M14x1.5 (male thread) 1
KL-0177-2062 Pull Spindle, M16x1.5 (male thread) 1

KL-0177-3 KL-0177-3

Drive Shaft Insertion Tool

Suitable for VW-Audi (Touareg etc.) BMW, Mercedes, Opel/Vauxhall, Renault,
Peugeot, Porsche (Cayenne etc.)
This tool is used for inserting drive shafts into wheel hubs. It is required for those
vehicles that feature tight tolerances between the wheel hub and drive shaft splines.
KL-0177-205
The different pull spindles that come with the tool ensure universal application.
Scope of Delivery: KL-0177-3 Drive Shaft Insertion Tool
Part No. Description Qty
KL-0177-3001 Housing, external Ø 39mm, internal Ø 29mm 1
KL-0177-3002 Housing, external Ø 46mm, internal Ø 36mm 1
KL-0177-2012 Shoulder Nut 1
KL-0177-205 Set of Pull Spindles 1
Scope of Delivery: KL-0177-205 Set of Pull Spindles
Part No. Description Qty
KL-0177-2051 Pull Spindle, M16x1.5 (female thread) 1
KL-0177-2052 Pull Spindle, M18x1.5 (female thread) 1
KL-0177-2053 Pull Spindle, M20x1.5 (female thread) 1
KL-0177-2054 Pull Spindle, M22x1.5 (female thread) 1
KL-0177-2055 Pull Spindle, M24x1.5 (female thread) 1
KL-0177-2056 Pull Spindle, M27x1.5 (female thread) 1
KL-0177-2057 Pull Spindle, M30x1.5 (female thread) 1
KL-0177-2061 Pull Spindle, M14x1.5 (male thread) 1
KL-0177-2062 Pull Spindle, M16x1.5 (male thread) 1

Copyright GEDORE Automotive GmbH, Germany (125) 3.5-01
formerly