Page 50 - LEŽAJEVI OSOVINE KLANN
P. 50
Kapitel_3.fm Seite 126 Freitag, 7. April 2017 10:54 10
Axle Repairs
Drive Shafts
KL-0415-4
KL-0415-4
Drive Shaft Insertion Tool
with 6 Adaptors, VW-Audi/BMW/Mercedes/Porsche
Suitable for VW-Audi (Touareg etc.), BMW (E30, E32, E34, E36 E38, E39, X5, F20
etc.), Mercedes (W203 etc.) and Porsche (Cayenne etc.).
For inserting the drive shaft into the wheel hub; required for vehicles whose drive
shaft is firmly fitting in the wheel hub. Also intended for mounting wheel hubs.
Scope of Delivery: KL-0415-4 Drive Shaft Insertion Tool with 6 Adaptors
Part No. Description Qty
KL-0415-0006 Adaptor M16x1.5 (e.g. BMW F20) 1
KL-0415-0007 Adaptor M20x1.5 (e.g. Porsche Cayenne, VW-Touareg) 1
KL-0415-0008 Adaptor M24x1.5 (e.g. BMW E36, Mercedes W203) 1
3 KL-0415-0009 Adaptor M22x1.5 (e.g. BMW E30, E46) 1 1
Adaptor M30x1.5 (e.g. BMW E32, E34, E36)
KL-0415-0010
KL-0415-0011 Adaptor M27x1.5 (e.g. BMW E32, E34, E38, E39, X5) 1
KL-0415-100 Drive Shaft Insertion Tool (base tool) 1
KL-0233-1
KL-0233-1
Pressure Screw Set
Suitable for VW-Audi.
The pressure screw set KL-0233-1 allows for the quick and easy removal of the outer
constant velocity joint from the drive shaft. (Not suitable for sleeve shafts)
Technical Data:
Weight: 595g
Scope of Delivery: KL-0233-1 Pressure Screw Set
Part No. Description Qty
KL-0233-10 Pressure Screw M14x1.5 1
KL-0233-11 Pressure Screw M16x1.5 1
KL-0049-303
KL-0049-303
Adaptor Set, Fiat Ducato
Designed for Fiat Ducato.
The adaptors KL-0049-3014 and KL-0049-3015 are used in conjunction with the
slide hammer KL-0049-31 thus enabling outer cv joints to be separated from the
drive shaft without any trouble.
Scope of Delivery: KL-0049-303 Adaptor Set, Fiat Ducato
Size Connection
Part No. Description Qty Ø Length
(Waf) thread
KL-0049-3014 Adaptor M18 to M28x1.5 1 32mm 40mm 65mm M18 / M28x1.5
KL-0049-3015 Adaptor M18 to M33x1.5 1 32mm 45mm 65mm M18 / M33x1.5
KL-0115
KL-0115
Wheel Hub Locking Tool
Covers virtually all passenger cars and light commercial vehicles.
Designed to counter-hold the wheel hub while loosening/tightening the fastening
screws/nuts that are found on front/rear drive shafts or wheel bearings.
Technical Data:
Length: 620mm
3.5-02 (126) Copyright GEDORE Automotive GmbH, Germany
formerly