Page 23 - UPRAVLJAČKI SISTEM KLANN

Kapitel_2.fm Seite 70 Freitag, 7. April 2017 10:13 10

Steering System/Geometry

KL-0049-360
KL-0049-360
U-Type Hook, with Joint

Especially suitable for removing the wishbone from the suspension ball joint
clamping hole. Used in conjunction with the slide hammer KL-0049-31 or
E Width: 40 mm KL-0049-300. Due to its profiled shape, the hook can be positioned very close to the
suspension ball joint.
Scope of Delivery: KL-0049-360 U-Type Hook, with Joint
Part No. Description Qty
2
KL-0049-3600 U-Type hook, without Joint 1
KL-0049-3502 Joint, M18 1
KL-0049-300
KL-0049-300
Slide Hammer Puller, 4.8kg (Base Tool)

The ideal tool for extracting stuck or tight-fitting components such as half-shafts,
universally jointed drive shafts, injector nozzles etc. It is used in conjunction with the
respective adaptors and puller bolts.
Scope of Delivery: KL-0049-300 Slide Hammer Puller, 4.8 kg (Base Tool)
Part No. Description Qty
KL-0049-3001 Pull Rod for KL-0049-3 1
KL-0049-3002 Hammer Weight, 4.8kg, for KL-0049-3 1
KL-0049-3003 Handle for KL-0049-3 1
KL-0049-3004 Hex Nut, M18 1

KL-0160-..
KL-0160-1
Separator Forks

These wedge-shaped forks enable the quick and easy separation of stuck ball joint
pins from their conical seats.
Also suitable for removing shock absorbers as well as for loosening drop arms.
Attention: Separator Forks may damage the gaiter.

KL-0160-1
Separator Fork, 18mm

Technical Data:
Fork opening: 18mm

KL-0160-2

Separator Fork, 23mm
Technical Data:
Fork opening: 23mm

KL-0160-3
Separator Fork, 30mm

Technical Data:
Fork opening: 30mm

KL-0160-4
Separator Fork, 40mm

Technical Data:
Fork opening: 40mm

Copyright GEDORE Automotive GmbH, Germany
formerly