Page 3 - KVAČILO

Kapitel_7.fm Seite 467 Dienstag, 11. April 2017 9:12 09

KL-0500-45 KA Clutch Tool Set (SAC), in a Plastic Storage Case (Pat.)

Resetting the Adjuster Ring

7. Install clutch pressure plate without clutch disc. 8. Screw in threaded bolts. 9. Compress diaphragm spring.
Mount clutch pre-compressor.

10. Insert reset tool. Turn back adjuster ring. 11. Release pressure on diaphragm spring. 12. Remove knurled nuts, clutch
Remove reset tool. pre-compressor and threaded bolts.
Remove clutch pressure plate.
Example of Clutch (SAC) Installation

7

13. Insert clutch aligner and clutch disc 14. Position clutch pressure plate. 15. Screw down threaded bolts.
into flywheel. Tighten clutch aligner. Mount clutch pre-compressor.

16. Compress diaphragm spring. 17. Remove knurled nuts, clutch 18. Screw in and tighten down the clutch
Screw in fastening screws. pre-compressor and threaded bolts. pressure plate fastening screws.
Release pressure on diaphragm spring. Remove clutch aligner.

Copyright GEDORE Automotive GmbH, Germany (467) 7-03
formerly