Page 7 - KVAČILO

Kapitel_7.fm Seite 471 Dienstag, 11. April 2017 9:12 09

KL-0500-50 K KL-0500-50 K
Dual Mass Flywheel Wear-Testing Tool
(For Testing On The Vehicle)

Universally suitable for vehicles equipped with Dual Mass Flywheel (DMF).
Indispensable tool for the quick and professional wear tests of Dual Mass Flywheels
(DMF). Tests can be performed directly on the vehicle with the clutch removed. The
test involves checking the rock allowance (axial play) and the freeplay angle (torsion
of the secondary flywheel against the primary flywheel until the tension of the spring
can be felt).
Note:
As a rule, Dual Mass Flywheels should always be checked for wear and damage when
replacing a clutch. Professional tests are essential as Dual Mass Flywheels that are
deteriorated or worn can damage the new clutch as well as the gearbox and drive
train.
Advantages:
• Universal application.
• Substantial time savings.
• The tool is easy to operate. KL-0500-500
• Professional and accurate working.
KL-0500-501
Scope of Delivery: KL-0500-50 K Dual Mass Flywheel Wear-Testing Tool
(on-vehicle tests)
Part No. Description Qty
KL-0500-500 K Dual Mass Flywheel Wear-Testing Tool 1
KL-4090-302 Torque Angle Gauge 1
KL-0128-1 Dial Gauge, Ø 58mm 1
Scope of Delivery: KL-0500-500 K Dual Mass Flywheel Wear-Testing Tool
(without Dial Gauge, Torque Angle Gauge)
Part No. Description Qty
KL-0500-500 Dual Mass Flywheel Wear Testing Tool (for testing on the vehicle) 1
KL-0043-5990 Plastic Storage Case 1
Scope of Delivery:
KL-0500-500 Dual Mass Flywheel Wear-Testing Tool (on-vehicle tests)
Part No. Description Qty
KL-0500-501 Slotted Bar with Fixing Device 1
KL-0500-502 Stand for Dial Gauge 1
KL-0481-7 Flywheel Locking Tool 2
Scope of Delivery: 7
KL-0500-501 Slotted bar with fixing device
Part No. Description Qty
KL-0500-5010 Slotted Bar with Protective Handle 1
KL-0043-5922 Special Screw, M6 2
Measuring the Checking the Measuring the
KL-0043-5923 Special Screw, M7 2 freeplay angle by rock allowance freeplay angle with
KL-0043-5924 Special Screw, M8 2 number of teeth degree gauge
KL-0043-5925 Shoulder Nut, M8 4
KL-0500-5011 Set Screw, M8x80 (pointer) 1

KL-0128-1 KL-0128-1
Dial Gauge, Ø 58mm

Spindle and clamping shank made of stainless steel, design and measurement
accuracy according to DIN 878-A.

Technical Data:
Graduation: 0.01mm
Measuring Range: 10mm
Housing -Ø: 58mm
1 pointer revolution: 1mm
Clamping shank Ø: 8mm

Copyright GEDORE Automotive GmbH, Germany (471) 7-07
formerly