Page 15 - Cataloge Doris.indd

Laminar Flow

Hood

Laminar hood technical specifications
• Hood system of vertical aeration type of air circulation
(with this system, the life of filters is increased
• Exterior chamber of iron sheet with white coating of
electrostatic powder resistant to temperature and humidity
• The insole of the hood is made of 304 steel in the form of
three mesh pieces and can be sterilized.
• Equipped with pre-filter and two HEPA filters (main and
exhaust) with an efficiency of 0.3 microns and a power of
99.99%
• Has a fluorescent lighting system
• Has a sterile surface system and cabin wall through UV
lamp
• Has a two-way centrifugal circulation technique
• Has an electric sliding door made of Plexiglas with vertical
movement
• Has a profile frame with wheeled bases with brakes that
can be easily detached from the device.
• It is possible to place the hood on laboratory platforms.
• Device equipped with Finger Touch control system
• Has a digital filter operating clock
• The delay timer is a UV lamp.
• In this device, about 75% of the air is circulated and 15 www.askilanlab.com
25% is removed from the hood after passing through the
HEPA filter.