Page 166 - Flipbook_SolidDesignSoutheast2020

Models 170-1-2 and 170-2-2 Volumetric Feeders

Standard Metering Auger Combinations and Output Capacities

• The feed output capacities for the indicated metering auger MODEL 170-1-2 CAPACITY CHART
sizes are based on feeding an amorphous material weighing (Capacities shown in cubic feet per hour)
approximately 40 pounds per cubic foot. Based on a 10:1 Output Feed Range for each Metering Auger
Total
• Metering auger sizes outlined in the Capacity Chart are First Metering Feed Output Second Metering Feed Output Feed Range
Auger Size
Auger Size
configured so that based on the indicated feed range out- CC 0.14 to 1.4 EE 0.87 to 8.7 62:1
put for each metering auger, the maximum output of the
D 0.24 to 2.4 F 1.4 to 14 58:1
first metering auger overlaps the minimum output of the
DD 0.42 to 4.2 G 2.9 to 29 69:1
second metering auger.
E 0.6 to 6 GG 4.2 to 42 70:1
• For the Model 170-1-2, the largest possible combination of EE 0.87 to 8.7 GG 4.2 to 42 48:1
metering augers is size “GG”, which will provide a total Based on a 15:1 Output Feed Range for each Metering Auger
(combined) output capacity of 84 cubic feet per hour First Metering Feed Output Second Metering Feed Output Total
(reference the applicable Capacity Chart). Auger Size Auger Size Feed Range
CC 0.093 to 1.4 F 0.93 to 14 150:1
• For the Model 170-2-2, the largest combination of metering D 0.16 to 2.4 FF 1.27 to 19 119:1
augers is size “GG” and “KK”, which will provide a total DD 0.28 to 4.2 G 1.93 to 29 104:1
(combined) output capacity of 160 cubic feet per hour E 0.4 to 6 GG 2.8 to 42 105:1
(reference the applicable Capacity Chart). EE 0.58 to 8.7 GG 2.8 to 42 72:1
• Metering auger combinations, other than those indicated
in the Capacity Charts, may be available. MODEL 170-2-2 CAPACITY CHART
(Capacities shown in cubic feet per hour)
Based on a 10:1 Output Feed Range for each Metering Auger
First Metering Feed Output Second Metering Feed Output Total
Auger Size Auger Size Feed Range
E 0.6 to 6 G 2.9 to 29 48:1
E 0.6 to 6 GG 4.2 to 42 70:1
E 0.6 to 6 H 5.1 to 51 85:1
EE 0.87 to 8.7 HH 7.2 to 72 83:1
F 1.4 to 14 K 9.6 to 96 69:1
FF 1.9 to 19 KK 11.8 to 118 62:1
G 2.9 to 29 KK 11.8 to 118 41:1
GG 4.2 to 42 KK 11.8 to 118 28:1
Based on a 15:1 Output Feed Range for each Metering Auger
First Metering Feed Output Second Metering Feed Output Total
Auger Size Auger Size Feed Range
E 0.4 to 6 G 1.93 to 29 73.1
E 0.4 to 6 GG 2.8 to 42 105:1
E 0.4 to 6 H 3.4 to 51 128:1
E 0.4 to 6 HH 4.8 to 72 180:1
EE 0.58 to 8.7 K 6.4 to 96 166:1
F 0.93 to 14 K 6.4 to 96 103:1
FF 1.27 to 19 KK 7.9 to 118 93:1
G 1.93 to 29 KK 7.9 to 118 61:1
GG 2.8 to 42 KK 7.9 to 118 42:1

Model 402X-170-1-2
"Weight-Loss-Differential"
Weigh Feeder with a
special downspout.

5