Page 9 - 553 Network Products

■ System Confi guration Examples

I/O Control

Operation data (travel amount, speed, etc.) is set in the driver
Easy Control Low-Cost Design Space Saving
in advance. When a signal is input from the directly connected
PLC, operation is performed using the setting data. A positioning Power CPU
Supply Positioning
module and pulse generator are not necessary, thus saving I/O Module Not
space and simplifying the system. Required
This kind of Use of switches instead
START STOP START STOP
confi guration is of PLC. Execute operation
CCW CW CCW CW
possible ▶ data directly from I/O.
Switch Box

FA Network Control Via Network Modbus (RTU) Control
Converter
RS-485 communication can be used to set operating data
and parameters, as well as input operation commands.
All FA network types are supported when a network
The protocol is Modbus (RTU) compatible, and can be
converter is used. The setting of operating data and
easily controlled from a PLC or other device.
operation commands input is performed from the network.
Multiple motors can be connected to and controlled by a Easy Control Simple Wiring Supports Serial Modules of Various Manufacturers
single converter without the need to increase the number
of host masters, contributing to a reduction in total costs. Power CPU Maximum Connection for 31 Axes
Supply
Easy Control Simple Wiring Multi-Axis Control at Low Cost
Power CPU
Supply Network ● Reduces the increase
Converters
of master devices when Serial
multiple units are in use Communication
Unit
● Unifi ed control of motors
and actuators ▼ This confi guration is also possible
● Easy control with I/O sense,
FA Network even over a network Mount an RS-485 communication
Unit Serial
Communication board in a computer to carry out
RS-485 Board setting and operation, instead of
using a PLC.
[Linking of Multiple Drivers]
Maximum 16 axes PC
Direct connection to a touch
screen instead of using a PLC.
Setting operation data and
parameters, checking alarm
history and trial runs are possible,
Touch screen
(Panel computer) making a PLC unnecessary.
Connection guides have been prepared when communicating Usable screen samples and operating manuals have
using the PLCs and FA network from the following been prepared when the touch screens from the following
manufacturers. (Download) manufacturers are connected. (Download)
• OMRON Corporation • Yaskawa Electric Corporation • Schneider Electric Co., Ltd.
• Mitsubishi Electric Corporation • Keyence Corporation • Mitsubishi Electric Corporation • Keyence Corporation
• Hitachi Industrial Equipment Systems Co.,Ltd. • Hakko Electronics Co., Ltd
• Fuji Electric Co., Ltd.

9