Page 21 - New Pontiac Engine Products - FEB 2019

Page
Pontiac Engine - Intake E21

Pontiac Engine
INL11351

Intake Plug - Manual Trans
INL10116
64-79 Pontiac Intake Bolts Pn# - INL10429 -1pc $8.00 Ea
68-72 Pontiac Valley Pan Pn# - INL10116 -10pc $18.00 Set 68-72 All Pontiac Intake Pipe Plug with Square Indent for Engines
Pn# - INL13393 - 1pc $149.00 Ea 64-69 Pontiac, GTO, Firebird- Intake Manifold Bolts - Black zinc. with 4 Speed Transmission. The originals were usually black zinc
this is black phosphate.
Factory correct for cast Iron manifold applications.
1968-72 Pontiac (All Models V8) Factory Correct Engine Intake
Stamped Steel Valley Pan. Silver Zinc Plating but has "Tomahawk"
Lightly stamped in front. Can Be filled. Pn# - INL11351-19pc $24.00 Set
1970-79 Pontiac, GTO, Firebird Intake Manifold Stud / Bolt Kit.
Used starting in 70 to hold the front AC brackets, alternator
bracket and the throttle bracket to the intake and intake to the head.
INL11353
Spade Temp Sending Unit
Pn# - INL13700 - 1pc $35.00 ea
68-79 Valley Pan Gasket 1967-81 Temperature sending unit cars With guages
Factory Exact with stand up spade wire connector.
Pn# - INL11661 -1pc $8.00 Ea INL11352
1968-79 Pontiac, GTO, Firebird V8 Cork Valley Pan Gasket
69-72 RA 4 / HO Intake Bolts
Pn# - INL11352-14pc $24.00 Set
1969 GTO, Firebird Ram Air IV Intake Manifold Stud / Bolt Kit.
Ram Air cars with the aluminum intake and the cast iron cross
over used large washer and flat head bolt to bolt the crossover in. INL10402 INL10403
Pn# - INL11353-23pc $32.00 Set
1970-72 GTO, Firebird Ram Air IV Intake Manifold Stud / Bolt Kit. Engine Temp Sending Units
Ram Air cars with the aluminum intake and the cast iron cross
Pontiac Valley Pan Bolts over used large washer and flat head bolt to bolt the crossover in. Pn# - INL10402 - 1pc $22.00 ea
68-81 Temperature Sending Unit for Cars with Gauges.
Pn# - INL10128 -4pc $8.00 Set Appearance very close to original except side post led
67-79 Pontiac Factory Correct Valley Pan Bolts & Washers.
These bolts hold the engine valley pan to the engine block. Pn# - INL10403 - 1pc $16.00 ea
68-81 Temperature Sending Unit for Cars with NO Gauges.
Appearance exact to NOS original.

69-70 Ram Air IV Intake Bolts
INL11672
Intake Manifold Gaskets Pn# - INL10266 -8pc $18.00 Set
69-70 Ram Air IV, GTO, Judge, Firebird, Intake Manifold Heat
Pn# - INL11672 - 3pc $24.00 Set Crossover Bolts. These are the correct bolts that hold the cast Factory OEM Wiring tape
iron heat crossover to the cylinder heads.
1965-71 Pontiac, GTO, Firebird, Intake Manifold Gaskets All V8. Pn# - INL10377 -2Rolls $12.95
For all V8 Engines except Ram Air 4 & 71 455 HO.
INL11350 GM Factory OEM Wiring Harness Tape - 1inch wide x 100 feet.
Pn# - INL11673 - 3pc $24.00 Set This is the non adhesive smooth tape used on all wiring.
1969-71 Pontiac, GTO, Firebird, Intake Manifold Gaskets.
For all V8 Ram Air 4 & 71 455 HO Engines.
Pn# - INL11668 - 3pc $24.00 Set
1972-79 Pontiac, GTO, Firebird, Intake Manifold Gaskets All V8. INL11349

70-79 Intake Stud
Pn# - INL11349 - 3pc $4.00 Ea Pontiac Intake / Carb Fitting
1970-79 Pontiac, GTO, Firebird Intake Manifold Stud / Bolt Kit. Pn# - INL15215- 1pc $8.00 Ea
Used starting in 70 to hold the front AC Brackets, Alternator 1964-67 Pontiac (all Models) Intake Manifold & Carb Brass
bracket and the throttle bracket to the intake and intake to the head. Fitting For 3/8" PCV Vacuum Hose. Used as intake and carb
Pontiac Engine Grommets Pn# - INL11350 - 12pc $15.00 Set vacuum source fitting, 1/8" Pipe, Brass, 3/8 Hose Nipple.
Pn# - INL10309 $4.00 ea 1970-79 Pontiac, GTO, Firebird Intake Manifold Stud / Bolt Kit. Inline Tube Manufactures
Used starting in 70 to hold the front AC Brackets, Alternator
1968-81 Pontiac Engine Valley Pan PCV Valve Grommet 1pc bracket and the throttle bracket to the intake and intake to the head. Parts for Concours Cars
Order Line 800. 385. 9452
Tech Support 586. 532. 1338
www.Inlinetube.com