Page 825 - UK Air Operations Regulations 201121
P. 825
~ Regulation SPO - ANNEX VIII - Specialised Operations n trik
28 DME 1 & 2 distances
29 Navigation data
29a Drift angle
29b Wind speed
29c W ind direction
No' Parameter
29 d Latitude
29e Lo ngitude
291 Ground speed
30 Landing gear or gear selector posrtion
31 Engin e exhaust gas tem peratu re (T 4 )
32 Turbine inlet tem perature [TIT/ ITT)
33 Fuel contents
34 Altitude rate (vertical speed) - only necessary when available from cockpit
instruments
35 Ice detection
36 Helicopter healt h and usage monitor system (HUMS)
36a Engine data
36b Chip detector
36c Track timing
36d E.xceedance di:scret es
36e Broadband average engin e vibration
38 Selected barometric setting - to be recorded fo r helicopters where t he parameter
is displayed electronically
38a Pilot
38b Co-pilot
39 Selected altitude (all pilot selecta ble modes ofoperation) - to be recorded for th e
helicopters where t he parameter is displayed electronically
40 Selected speed (all pilot selectable modes of operat ion) - to be recorded for th e
helicopte rs where t he parameter is displayed electronically
41 Not used (selected M ach)
42 Selected vertical s.peed (all pilot selectable modes of operation) - t o be recorded
for the helicopters w here the parameter is displayed electronically
43 Selected heading (all pilot selectable modes of ope@tion) - to be recorded for the
helicopters w here t he parameter is displayed electronically
44 Selected flight path (all pilot selectable modes of oper ation) - to be recorded for
the helicopters where the parameter is displayed electron ically
No' Parameter
45 Selected decision height (all pilot selectable modes of operation) - to be recorded
for the helicopters w here the parameter is displayed electronically
46 EFIS display fo rmat
47 M ulti-function/engine/ alerts display fo rmat
48 E vent marker
The number in the left hand column reflects t he serial num ber depicted in EUROCAE ED-
112.
SPO.IDE.H.145 AMC2 Flight data recorder
OPERATIONAL PERFORMANCE REQUIREMENTS FOR HELICOPTERS HAVING AN MCTOM OF
MORE THAN 3 175 KG AND FIRST ISSUED WITH AN INDIVIDUAL CofA ON OR AFTER 1 JANUARY
2023
(a) The operational performance requirements for flight data recorders (FDRs) should be
those laid down in EUROCAE Document 112A (Minimum Operational Performance
Specification for Crash Protected Airborne Recorder Systems) dated September 2013, or
any later equivalent standard produced by EUROCAE.
(b) The FDR should, with reference to a timescale, record:
(1) the list of parameters in Table 1 below;
(2) the additional parameters listed in Table 2 below, when the information data source
for the parameter is used by helicopter systems or is available on the instrument
panel for use by the flight crew to operate the helicopter; and
(3) any dedicated parameters related to novel or unique design or operational
characteristics of the helicopter as determined by the Agency.
(c) The parameters to be recorded should meet the performance specifications (range,
sampling intervals, accuracy limits and resolution in read-out) as defined in the relevant
tables of EUROCAE Document 112A, or any later equivalent standard produced by
EUROCAE.
20th November 2021 825 of 856