Page 73 - Final Report - KAUSC Team
P. 73
KAUSC Team
According to figure 41, which is a bending machine, the purpose of it is to bend steel pipes.
So, it is used it to get the required curves, by placing the pipe in the machine by placing
the bending point in the center of the machine/tool.
Figure 46 bender machine
Moving to the next step, which is cutting the profiles figure 42 by using the lathe machine
figure43. To center the pipe in the lathe, a height caliper used to mark the center of the pipe
figure().
Figure 47 pipes profile Figure 48 making the profiles
Figure 49 height caliper
72 | P a g e
