Page 79 - Final Report - KAUSC Team
P. 79
KAUSC Team
4.4 Process sheet
Here is an example of process sheet that explain the profiling process for pipes. (All other
process sheets are available in appendix B)
Table 37 process sheet of pipes profile
Process Operation Sketch Tool Cutting conditions Cutting Time
No. used length (min)
Speed Feed DoC (mm)
(RPM) (mm/rev) (mm)
Marking the Height - - - - 0.3
1 pipe's caliper
center
2 Fixing the Lathe - - --1
pipe tool
holder
3 Work HSS - - - - 0.25
adjusment
Cutting the HSS 605 0.076 5.325 21.3 0.46
4 profile
HSS 605 0.076 5.325 21.3 0.46
(stage 1)
Cutting the
5 profile
(stage 2)
Total time 2.47
78 | P a g e
