Page 6 - INSTALLATION INSTRUCTIONS BOOK_Neat

INVISIBLE PROTECTION AGAINST WETHERING FOR
POROUS SURFACES THROUGH NANO4LIFE PRODUCTS

NANO4LIFE for porous surfaces is a stain resistant formula to coat porous silicate
substrates with, such as sandstone, concrete, terracotta and clay. NANO4LIFE for
porous surfaces is solved in water and instantantly ready to apply.

As a characteristic the bifunctional connections containing silicon oxides, hydroxyl-
and carboxyl functions provide a permanent chemical bonding to the surface of the
substrates.
The other functional group is causing an extreme low surface energy on the
substrate. Such layers have the distinction of (a) perfect hydrophobia as well as oleo
phobia. Besides the chemical bonding to the substrate NANO4LIFE for porous
surfaces is of particular relevance to develop into a cross-linking by building up two-
and three dimensional networks.

NANO4LIFE for porous surfaces is ready to use and easy to apply right on the
surface, where the absorbed NANO4LIFE for porous surfaces is forming a
chemical and mechanical persistent layer.
Because of the particular formula NANO4LIFE for porous surfaces is optimized for
absorbing surfaces. Therefore it is supposed to use profitable on porous substrates
as an invisible, impregnating, stain-resistant and UV-stable coating for any kind of
stone like sandstone, precast concrete block or terracotta, brick of clay or stone
panel. As an operating range floor and wall covering, facades of buildings, common
terracotta and roofing tiles are to be considered. NANO4LIFE for porous surfaces
only covers the inside of the pores with an ultra thin layer so the substrates are still
breathable after coating.

NANO4LIFE EUROPE – Vouliagmenis Ave. 318 – Ag. Dimitrios -173 43 Athens – Greece
Tel:0030 213 0272732 Mob:0030 6944932317 Email: info@nano4life.co