Page 13 - installation instructions

ADVANTAGES OF NANO4LIFE for glossy surfaces:

 The appearance of the substratum is not affected
 Tremendous friction resistance
 Powerful hydrophobic and oleo phobic properties
 Easy to apply
 Short drying period. Can be stored
 Directly after application.
 No additional power or UV light needed.
 High-pressure/steam cleaner proof
 High efficiency through economical use
 Tolerant of high temperatures (up to 450° C peak temperature)
 Completely frost proof

PRODUCT– INFORMATIONS - NANO4LIFE for glossy surfaces

NANO4LIFE for glossy surfaces is ready to use and can be applied directly to the
surface, where a few nm thin chemical and mechanical resistant layers are formed.
Due to its formula, NANO4LIFE for glossy surfaces is suitable for non-absorbent
silicate surfaces. Therefore, it can be used advantageously as a dirt-repelling, UV-
proof coating for ceramic or glass surfaces, no matter whether insulated glass, ESG,
VSG, or mirrored glass. Areas suitable for use are sanitary ware, glass facades,
canopies, winter gardens, solar panels, mirrors, automobile glass, shower partitions,
and glass panels.

INSTRUCTIONS FOR USE

NANO4LIFE for glossy surfaces IS READY TO USE. Spraying with a spraying
device is recommended as the method application. The best results are achieved
with an HVLP nozzle. This produces very fine drops.

Spraying devices:

The number of nozzles depends on the dimensions of the substratum. They should
be arranged in such a way that the substratum is covered in its entire width by the
spray. After application, the substratum should be re-polished with a cloth dampened
in NANO4LIFE for glossy surfaces
Other polishing techniques or blowing off with air or water has also brought very good
Results.

Other application techniques:

Besides spraying, other techniques such as dipping, brushing on, or applying with
soft paper or linen are also possible. As a rule, however, these applications are
associated with a higher consumption. If any smearing should occur, it should be re-
polished with a cloth dampened in NANO4LIFE for glossy surfaces.

Hardening Times:

A few minutes after application, NANO4LIFE for glossy surfaces has stabilized
enough to be transported and therefore can be stored immediately. The complete

hardening is achieved after 24 hours (ambient temperature 20° C). For lower
temperatures, a lengthening of the hardening time is possible.