Page 41 - Arvill 2019 Catalogue

Hilti TE30-C-AVR
• Drilling anchor, rebar and through holes in concrete and masonry – poss dia range 4-28 mm, recommended dia range 10-20 mm
• Chiseling in brick and block, corrective chiseling
and surface finishing on concrete
• Drilling in wood and metal using the optional
quick-release chuck and drill bits with smooth shank up to 13 mm dia
• Driving anchor screws and concrete screw
Hilti TE50-AVR
• Hammer drilling in concrete, masonry and natural stone (poss dia range 12-55 mm,
recommended dia range 16-32 mm)
• Light to med-duty chiselling in masonry and concrete
Drilling penetrations mainly in masonry using percussion core bits (possible diameter range 45-150 mm, recommended diameter range up to 82 mm)
anchors
Heavy Duty Combi Hammers:
Hilti TE60-ATC-AVR
Hilti TE80-ATC-AVR
• Hammer drilling in concrete, masonry and natural
stone with drill bits 12 - 150 mm in diameter
• Drilling holes for heavy-duty anchors from 20-40 mm
in diameter
• Breaching and demolition with pointed and flat chisels
• Drilling with high torque in wood and steel
• Hammer drilling in concrete, masonry and natural stone with drill bits 1/2" - 6" in diameter
Medium Duty Combi Hammers:
• Drilling anchor and through-holes in concrete and masonry (recommended diameter range 18-80 mm) • Coring in masonry and concrete with TE-Y BK core bits up to 122 mm diameter
Medium-duty demolition work
ATC: Active Torque Control
41
Drilling