Page 24 - scales manual v1014 web

CARDINAL MS

1. Remove right side panel and slide cal switch
2. Scale will Prompt to LOAD Scale To XXXXXlbs
3. Load scale and press ENTER
4. UNLOAD, unload scale and press ENTER
5. DONE, slide switch and cycle power

CARDINAL MS-8

1. Push Cal Button while turning on scale
2. CAL? Press 1
3. LOAD? Place 8 lbs on platter and press ENTER
4. UNLOAD? Remove weight and press ENTER
5. ENTER to “DONE”, turn Off

CARDINAL 200

1. Press cal switch
2. SETUP is displayed, press cal switch until CAL is displayed, press ENTER
3. Press 1/YES and ENTER
4. CAL 1 is displayed, Press ENTER
5. Unload Scale and press ENTER
6. CAL 2, Press enter
7. Load Scale, Key in Cal weight and press ENTER
8. When Sio is displayed, press the * key

CARDINAL 204

1. Push Cal button
2. FLASH is displayed
3. Press PRINT until CAL is displayed
4. Press the * key, press UNITS key then PRINT
5. Load is displayed, load scale and press PRINT
6. Enter cal weigh value by using the UNITS and * keys
7. Press PRINT
8. UNLOAD is displayed, remove weights and press PRINT
9. Press PRINT until DONE is displayed, cycle power

© 2014 ScaleResource.com Page 24