Page 11 - Section A - Complete

KTM Special Tools

Shock Needle Removal Driver
Dual Chamber Fork Cap Wrench
Shock needle removal driver. Its special pin design is for working the
WP PDS Shock body, to remove the compression needle from the Has a 12mm slot for holding the damper rod for removing the rebound
shock. Fits KTM’s with White Power PDS shocks. bolt. This allows for the removal of the cartridge from the lower
fork leg. Made from billet 6061-T6 and anodized
Shock Needle Removal Driver 00-8060 Motion Pro blue. 50mm, 6pt box wrench for
removing the fork cap (cartridge) on WP 4860
MXMA dual chamber closed cartridge (WP USD
48mm) on late-model KTM’s.
50mm Fork Cap Wrench 00-872

KTM Power Valve Adjustment Tool
Power valve adjustment tool. For use on KTM 2-Stroke models;
200/250 SX, 250 XC/XC-W, 250/300 EXC and 300 XC/
XC-W. Constructed from aluminium, this tool features
a special 5mm square drive end for adjusting the
power valves.
Power Valve Adjusting Tool 00-8061

Compression Bolt Removal Tool KTM
22mm hex and 3/8 square drive. This tool allows removal and replacment of the accessory
fork cap KTM Part No. 4860074S. This tool is slotted to allow removal and replacement of
caps with the KTM Pro bleeder.
KTM Crankshaft Mounting Tool KTM Fork Cap Remover 00-214
KTM Crankshaft mounting tool. Specifically designed
for KTM crankshaft assembly. Fits crankshaft smoothly
without damage to crankshaft or bearings. Overall length
of tool is 146mm and constructed from carbon steel. Fitting
face is O.D. 70mm x I.D. 43.5mm / 3.5mm depth. Long bolt end
is Dia. M12 x 1.25mm with drive hole.
Primary Gear Wheel Bracket Tool
KTM Crankshaft Mounting Tool 00-8100
Primary gear wheel bracket tool for use on KTM 440
EXC 1994-95 & 550 MXC 1996. This tool is designed
with special curved teeth for use on the primary gear
location on crank.
Primary Gear Wheel Bracket Tool 00-8063
KTM Locating Drum Tool

KTM Locating drum tool. Used to hold the location drum when
dismantling and assembling the engine. Specifically designed
so as to prevent damage to the engine parts. 5mm thick x
double hex 35.5 / 39mm. Constructed from high quality
steel with a zinc plated finish. OEM Ref: 5032903800.
Fits: KTM 125/200 1997-10, 144 SX 07-09 & 150 SX
2009-10.
KTM Locating Drum Tool 00-8099
Oil Filter Removal Tool
• Ideal for easy removal of recessed KTM oil filters.
• Conical point screw pierces and grabs the sheet metal end-
cap on filter.
• Contoured handle provides a secure grip.
KTM Heim Joint Tool • Reduces potential damage to the engine cases.
• Not for use on re-usable oil filters.
Removes and replaces KTM Heim joints (OEM Ref:
50304090044) or aftermarket equivalents. Aligns Oil Filter Removal Tool 00-619
Heim joint for easy installation. Built in stop correctly
centers Heim joint in swing arm. Aligns and installs
Heim joint seals. Anodized aluminium construction
reduces the possibility of damaging your swing arm.
Handle includes retention o-ring to hold Heim joint
adaptors and Heim joint bearing in place. Ergonomic
handle for a comfortable fit. Made from billet 6061-
T6 and anodized Motion Pro blue. A-Arm Needle Bearing Press Tool
KTM Heim Joint Tool 00-644 A special tool for fitting A-arm needle bearings.
Designed for use when installing the A-Arm needle
bearings on KTM 450 & 525 ATV models. Tool has
a carbon steel construction. Overall length 85mm x
Both end faces 10mm.
A-Arm Needle Bearing Press 00-8064

*Please See Our Tools Catalogue For Full Range Of Products
E-mail: oro@btconnect.com www.oro2u.com A9