Page 8 - Cyclone Product Catalogue_Sept2024_web_LR_Neat

GATES – VERTICAL BRACE

Description Specifications

Vertical brace gate Vertical brace gate – Galvanised

Cyclone’s Vertical brace gate is an all-purpose, ‘value for money’ • Produced from 25mm NB, 150g/m zinc coating, hot dipped galvanised pipe, with a nominal
2
gate. Suitable for many rural applications, the Vertical brace gate wall thickness of 2mm.
has additional frame strength due to the welded vertical brace • Mesh spacing graduating from 32mm at the bottom of the gate to a maximum of 100mm at
and mesh insert. the upper part of the gate (5mm wire thickness).
• Welded mesh insert features graduated horizontal wires which increase the density of the
Range strands in the lower part of the gate. Welded mesh insert is “made to fit” our gates, ensuring
a finished mesh edge on all four sides of the gate frame.
Material # Item description • Welded collar attached at hinge end to increase compatibility with a broader range of gate
Access gate – Galvanised hardware, including brooker hinges.
221093 1170 x 1000mm (3') braces 0 • Full notch weld construction.

Vertical brace gate – Galvanised
318399 1170 x 1170mm (4') braces 0
318450 1170 x 1470mm (5') braces 1
318451 1170 x 1770mm (6') braces 1
220475 1170 x 2370mm (8') braces 1 1170mm
220481 1170 x 2970mm (10') braces 1
220487 1170 x 3570mm (12') braces 1

220493 1170 x 4170mm (14') braces 2
220497 1170 x 4770mm (16') braces 3
Braces 0 = no welded vertical brace
1170mm = gate height 2370mm = gate width 8’ = gate opening

ACTUAL SIZE GATE OPENING LEFT & RIGHT HAND WELDED MESH
CONFIGURATION

NATIONAL PRODUCT CATALOGUE | EFFECTIVE SEPTEMBER 2024 8 www.cycloneproducts.com.au | t: 1800 199 450 | sales@cycloneproducts.com.au