Page 9 - Cyclone Product Catalogue_Sept2024_web_LR_Neat
P. 9
GATES – CROSS BRACE
Description Specifications
Cross brace gate Cross brace gate – Galvanised
The Cyclone Cross brace gate is a versatile rural gate. With added • Produced entirely from 32mm NB, 150g/m zinc coating, hot dipped galvanised pipe, with
2
strength from the 32mm NB hot dipped galvanised pipe, this 32mm NB cross brace and with a nominal wall thickness of 2mm.
gate is preferred by cattle producers in applications where higher • Welded mesh insert features graduated horizontal wires which increase the density of the
stock pressure exists. strands in the lower part of the gate. Welded mesh insert is “made to fit” our gates, ensuring
a finished mesh edge on all four sides of the gate frame.
Range • Welded collar attached at hinge end to increase compatibility with a broader range of gate
hardware, including brooker hinges.
Material # Item description • Full notch weld construction.
Cross brace gate – Galvanised
326054 1170 x 2370mm (8')
326055 1170 x 2970mm (10')
326056 1170 x 3570mm (12')
1170mm
326057 1170 x 4170mm (14')
326058 1170 x 4770mm (16')
Braces 0 = no welded vertical brace
1170mm = gate height 2370mm = gate width 8’ = gate opening
ACTUAL SIZE GATE OPENING LEFT & RIGHT HAND WELDED MESH
CONFIGURATION
NATIONAL PRODUCT CATALOGUE | EFFECTIVE SEPTEMBER 2024 9 www.cycloneproducts.com.au | t: 1800 199 450 | sales@cycloneproducts.com.au
