Page 8 - Pontiac Catalog

Suspension Parts - Front End Page
06
Suspension Front / Rear, Underbody
D
A A
C
B B

D C C

GM Upper Ball Joint Rivets
Front Control Arm Bushings
A
Front Frame Bumpers

C A Suspension, Underbody Rear / Front
Pn# - INL10695 - 2pc $14.00 Set
64-72 GM A-body , 67-69 F-body, 68-74 X-body Front Upper A- Pn# - CARMR01 - 24pc $24.00 set
Arm Cross Shaft Bushings. 2 sets required per car. Set per side.
1964-79 GM Upper Ball Joint Rivets Set of 8.
Details: From the factory, all upper ball joints were riveted into
B place. Inline Tube has manufactured a correct rivet head bolt
that will install and give that factory original look to your control
Pn# - INL11097 - 2pc $16.00 Set arm. For use with factory style ball joints or TRW not MOOG
Applications: 1967-79 Camaro / Firebird / Trans Am, 1968-74
64-72 Chevelle / GTO/ 442 / GS, 68-69 Firebird / Camaro, 68-74
X-body, Front Upper Control Arm Bumpers. Bump stop for the Nova / Ventura / Apollo, 1964-77 Chevelle / El Camino / Monte
control arm.Factory correct with tangs & part number 384220 AU Pn# - INL10693 - 2pc $24.00 Set Carlo, 1964-77 GTO / LeMans / Tempest, 1964-77 442 /
Cutlass / F-85 / Skylark, Any 1969-79 GM Ball Joint
Front Control Arm Bumpers 64-72 GM A-body Chevelle GTO, 442, GS Front Lower Control
Arm Bushings. Oval rear bushings were typically used on only
Pontiac, Buick & Olds but there are exceptions. 2 sets are
D required per car, one set per side.
B
C
Pn# - INL10321 - 2pc $12.00 ea
64-72 Chevelle / GTO/ 442 / GS, 68-69 F-body Firebird / Camaro, Pn# - INL10699 - 1pc $29.00 Ea
68-74 X-body Nova, Front Lower Control Arm Bumper. Pn# - INL10694 - 2pc $24.00 Set 64-72 GM A-body 442, 67-69 F-body Firebird / TA, 68-74 X-body
64-72 GM A-body , 67-69 F-body, 68-74 X-body Front Lower Ventura, Front Upper A-arm Ball Joint. Comes with nut and
Control Arm Bushings. Round rear bushings were typically used grease fitting. This is now a factory correct exact reproduction.
on only Chevrolet but there are exceptions. 2 sets are required per
car, one set per side.
D C

Control Arm Bolts Pn# - INL10700 - 1pc $29.00 Ea
Pn# - INL10696 - 8pc $8.00 Set 64-72 GM A-body 442, 67-69 F-body Firebird / TA Front Lower
Pn# - CAK04A - 8pc $29.00 set 64-77 GM A-body Chevelle, GTO, 442, GS, 67-81 F-body, Front Control Arm Ball Joint. Comes with nut and grease fitting. This is
64-77 A-body, 67-81 F-body, 68-74 X-body - 4 control arm bolts A-arms Cross Shaft Alignment Shims, 4 thick .135", 4 thin .63" now a factory correct exact reproduction. Excellent Quality
used to align the front suspension. Use as needed.
& nuts set.
Pn# - CAK08A - 16pc $59.00 set Pn# - INL10697 - 1pc $1.00 ea
64-77 A-body, 67-81 F-body, 68-74 X-body - 8 control arm bolts 64-77 GM A-body Chevelle, GTO, 442, GS, 67-81 F-body Front
& nuts set. A-arms Cross Shaft Alignment Shim, 1 thick .135"
Pn# - CAK12A - 24pc $89.00 set
64-77 A-body, 67-81 F-body, 68-74 X-body - 12 control arm bolts Pn# - INL10698 - 1pc $1.00 ea
& nuts set. 64-77 GM A-body Chevelle, GTO, 442, GS, 67-81 F-body Front
Details:These are factory correct control arm bolts and lock A-arms Cross Shaft Alignment Shim, 1 thick .63"
nuts for all A/F/X-body cars. This kit includes the black zinc
bolts and silver zinc lock nuts. These are the correct, exact to
NOS bolts that were used on your car from the factory. They
have head markings with 6 dashes and the F in the center. Find us on Facebook GM Spindle Nut Set
There are 12 bolts on your car. 4 are for the front control arms for news & product
and 8 are used in the rear. This is the factory correct hardware. Pn# - INL11149 -18 pc $16.00 Set
In the 60’s there were many manufacturers of these bolts for GM introductions 64-81 GM-Front rotor & spindle nuts, washers, pins. Used to hold
and we have seen multiple head markings on a single car. This the rotor to the spindle and the spindle to the upper & lower control
www.facebook.com/inlinetube
is one of those head markings. arm and the spindle to the end link, for disc or drum brakes.
Order Line 800. 385. 9452
Tech Support 586. 532. 1338
www.Inlinetube.com