Page 395 - Republic Drill

UNO-DEX Indexable Fly Cutter
TM

Single Flute – Positive Rake
BORING & TURNING www.RepublicDrill.com/videos BORING & TURNING
• Low cost Exclusively
• Rugged construction for long tool life By
• One clamp fits all tool sizes
• Uses standard inexpensive inserts Watch our instructional videos on
• Produces wider cuts than end mills

Triangle Inserted Square Inserted
Cutting & Head Shank Style or Tool Price Cutting & Head Shank Style or Tool Price
Diameter Diameter No Each Diameter Diameter No Each
1-1/2 3/4 KT150-34 95.68 1-1/2 3/4 KX150-34 95.68
1-1/2 R-8 KT150-R8 112.13 1-1/2 R-8 KX150-R8 112.13
2 3/4 KT200-34 109.14 2 3/4 KX200-34 109.14
2 R-8 KT200-R8 127.08 2 R-8 KX200-R8 127.08
2-1/2 3/4 KT250-34 128.57 2-1/2 3/4 KX250-34 128.57
2-1/2 R-8 KT250-R8 152.49 2-1/2 R-8 KX250-R8 152.49
3 3/4 KT300-34 151.00 3 3/4 KX300-34 151.00
3 R-8 KT300-R8 170.43 3 R-8 KX300-R8 170.43
Inserts sold separately. Inserts sold separately.

Sets

Sizes Description Pcs. Set No. Price
1-1/2, 2, 2-1/2, 3 Triangle Inserted – 3/4" Shank 4 KT750 484.39
1-1/2, 2, 2-1/2, 3 Triangle Inserted – R-8 Shank 4 KTR8 562.13
1-1/2, 2, 2-1/2, 3 Square Inserted – 3/4" Shank 4 KX750 484.39
1-1/2, 2, 2-1/2, 3 Square Inserted – R-8 Shank 4 KXR8 562.13
All sets are supplied in wood block

TPG Carbide Inserts SPG Carbide Inserts
• Triangle • Square
• Positive rake ground all over • Positive rake ground all over
Price Each SPU Carbide Inserts
Tin
Insert No. I.C. Width Radius C–2 C–6 Coated* • Square
TPG321 3/8 1/8 1/64 6.74 6.74 8.08 • Positive rake ground top & bottom
TPG322 3/8 1/8 1/32 6.74 6.74 8.08 Price Each
TPG323 3/8 1/8 3/64 6.74 6.74 8.08 Tin
TPG324 3/8 1/8 1/16 6.74 6.74 8.08 Insert No. I.C. Width Radius C–2 C–6 Coated*
*C-6 Grade TiN Coated SPG422 1/2 1/8 1/32 6.67 6.67 7.54
SPG423 1/2 1/8 3/64 6.67 6.67 7.54
TPC Carbide Inserts SPG424 1/2 1/8 1/16 6.67 6.67 7.54
• Triangle SPU422 1/2 1/8 1/8 5.80 5.80 6.68
SPU423
1/2
• Positive rake ground all over *C-6 Grade TiN Coated 1/8 1/8 5.80 5.80 6.68
• Wiping flats on three corners
Price Each SPC Carbide Inserts
Tin
Insert No. I.C. Width C–2 C–6 Coated* • Square
TPC32ZR 3/8 1/8 6.48 6.48 7.62 • Positive rake ground all over
*C-6 Grade TiN Coated • Wiping flats on four corners
Price Each
Replacement Parts Tin
Insert No. Radius I.C. Thickness C–2 C–6 Coated*
Part No. Description Price Each SPC42ZR – 1/2 1/8 6.90 6.90 8.26
Part CTD-2 Hold Down Clamp 7.95 *C-6 Grade TiN Coated
Part CS832-12 Clamp Screw .75
Part CSW 9/64 Allen Wrench for 8-32 Screw .75
393