Page 478 - Republic Drill

Mounting Plates for

3 & 6-Jaw chucks

For independent chucks - series Y10-104, Y10-174, Y10-114, Y10-161, Y10-171 (old Type Design)
Mounting plates are precision machined to suit the spindle nose of your machine.
cHUcKs on the chuck side face of the adapter close to the mounting holes, rotate the adapter, and if the total indicator reading
For maximum accuracy of Accra-Set™ mounting plates, mount plate on machine spindle nose, place a dial indicator
(TIR) exceeds .0005", take a light truing cut across the face of the mounting plate.
Type D Mounting Plates - “camlock"
Model number
Spindle 6" 8" 10" 12" 15" 18" 24"
D-3 Y03-0605020 Y03-0805020
Price 440.00 465.00 — — — — —
D-4 Y03-0605021 Y03-0805021 Y03-1005021
Price 440.00 465.00 595.00 — — — —
D-5 Y03-0605022 Y03-0805022 Y03-1005022
Price 500.00 500.00 660.00 — — — —
D-6 Y03-0805023 Y03-1005023 Y03-1205023 Y03-1505023
Price — 500.00 660.00 770.00 1,008.00 — —
D-8 Y03-1005024 Y03-1205024 Y03-1505024 Y03-1805024 Y03-2405024
Price — — 720.00 880.00 1,040.00 1,435.00 2,040.00
D-11 Y03-1205025 Y03-1505025 Y03-1805025 Y03-2405025
Price — — — 1,008.00 1,200.00 1,595.00 2,075.00

Type A American standard short Taper A-1 & A-2 spindles
Model number
Spindle 6" 8" 10" 12" 15" 18" 24"
A-4 Y03-0605009
Price 450.00 — — — — — —
A-5 Y03-0605010 Y03-0805010 Y03-1005010
Price 450.00 480.00 635.00 — — — —
A-6 Y03-0805011 Y03-1005011 Y03-1205011
Price — 480.00 690.00 705.00 — — —
A-8 Y03-1005012 Y03-1205012 Y03-1505012 Y03-1805012
Price — — 690.00 705.00 1,008.00 1,450.00 —
A-11 Y03-1505013 Y03-1805013 Y03-2405013
Price — — — — 1,008.00 1,595.00 2,040.00
A-15 Y03-2405014
Price — — — — — — 2,075.00
Type l American standard long Taper Key Drive spindle
Model number
Spindle 6" 8" 10" 12" 15" 18" 24"
L-00 Y03-0605031 Y03-0805031 Y03-1005031
Price 560.00 625.00 740.00 — — — —
L-0 Y03-0605032 Y03-0805032 Y03-1005032 Y03-1205032
Price 560.00 625.00 740.00 1,025.00 — — —
L-1 Y03-0805033 Y03-1005033 Y03-1205033 Y03-1505033 Y03-1805033 Y03-2405033
Price — 720.00 740.00 1,025.00 1,440.00 2,075.00 3,035.00
L-2 Y03-1005034 Y03-1205034 Y03-1505034 Y03-1805034 Y03-2405034
Price — — 955.00 1,025.00 1,440.00 2,555.00 3,035.00
L-3 Y03-1505035 Y03-1805035 Y03-2405035
Price — — — — 1,440.00 2,715.00 3,035.00

™
For Hardinge and elgin lathe Threaded & Blank Mountings for Accra-set chucks
®
Model number
Model number
Spindle 5" 6" 8" 10" 12"
Spindle 5" 6"
Blank Y03-0505040 Y03-0605040 Y03-0805040 Y03-1005040 Y03-1205040
4° Taper Y03-0505044 Y03-0605044 Price 340.00 340.00 440.00 450.00 480.00
Price 400.00 475.00 1-1/2"-8 Y03-0505041 Y03-0605041 Y03-0805041 — —
Price 440.00 440.00 480.00
2-3/16"-10 1-3/4"-8 Y03-0505042 Y03-0605042 Y03-0805042 — —
Threaded Y03-0505045 Y03-0605045 Price 465.00 465.00 480.00
Price 400.00 475.00 2-1/4"-8 Y03-0505043 Y03-0605043 Y03-0805043 — —
465.00
480.00
Price
Plates for rotary tables also available. 2-3/8"-6 465.00 Y03-0605046 Y03-0805046
Price — 640.00 688.00 — —
* Threaded adapter plates and special plates are available upon request.
“Accra-Set™" chucks and adapters are shipped unassembled unless ordered assembled at an extra charge.
When ordering special adapters, give make, model number, size, and spindle dimensions of machine.
476