Page 13 - Skandacor Product Guide No8

LAMINATING

™
GsPRO LAMINATE
3" Core

Platinum TM GsPRO™ (polypropylene) 3" core film is available in 11.75” to 24.5” widths, specifically designed for the
sampling, presentation folder, packaging, and bookcover industry. It provides an extremely high-gloss surface that
is specially treated to achieve a high dnye level, allowing the acceptance of all types of surface treatments, spot UV
coatings, foil stamping, and most glues. It has excellent folding characteristics.

1.2 mil GsPRO™ GLOSS (3" Core)
HELPFUL HINT:
Roll Size 1-5 6-11 12+ Code
11.75" x 10000' $298.22 $266.49 $234.77 LFGSD.3.1175.10000
HELP, MY PRINTS ARE CURLING!
12.75" x 10000' $323.60 $289.17 $254.75 LFGSD.3.1275.10000
With a roll laminator, a curl upward
13.75" x 10000' $348.98 $311.85 $274.73 LFGSD.3.1375.10000 or downward is the result of too much
tension on that particular mandrel. Slowly
18.5" x 10000' $469.53 $419.58 $369.63 LFGSD.3.1850.10000 adjust the tension until the curl disappears.
When the top and bottom tension is
19.5" x 10000' $494.91 $442.26 $389.61 LFGSD.3.1950.10000
balanced, your items will lay flat. For
22.5" x 10000' $571.05 $510.30 $449.55 LFGSD.3.2250.10000 assistance with this, call our service
department at 1.888.820.9020.
24.5" x 10000' $621.81 $555.66 $489.51 LFGSD.3.2450.10000

INDUSTRIAL
HIGH-SPEED LAMINATING

DUPLEX PRODUCTION
LAMINATION SYSTEM

• includes 30” Duralam F550 high speed laminator,
automatic sheet feeder and high-speed cutter
• Laminate at speeds up to 65' per minute with one operator
• Options available: slit scrap rewinder, mark detection
kit for cutting on crop marks, and an inline punch for
laminated book binding jobs

HELPFUL HINT:

We recommend doing a seal test on any laminated piece to see how well the film is stuck to the
printed media. To perform a seal test:
• Without cutting through the printed media, use a sharp knife to cut an “X” in the lamination.
• Peel back the corner of the “X” to test adhesion quality.
• If ink pulls away from the paper with the film, your laminate is adhered well.
All laminates will cure and be stuck better 24 to 48 hours after lamination.

skandacor.com 13