Page 3 - CoolSpot DX & RAMOS
P. 3
CoolSpot WM-DX
CoolSpot WallMount DX units are installed in lieu of rack side panels,
meaning there no limitation on overhead clearance.
These cooling units are compatible with
the following free-standing racks series:
PREMIUM Heavy RHF
PREMIUM Cabling RDF
PREMIUM Server RSF
OPTIMAL ROF and
OPTIMAL Flex RMF
CoolSpot WM units are ideally suited for spaces where there is insufficient
clearance to install a top mount solution. CoolSpot WM is available with
capacities ranging from 1.1 to 3.0 kW per cooling unit.
Up to two CoolSpot WM cooling units can be fitted to a rack for increase
capacity or redundancy purposes (optionally duty cycle balancing).
When installing these units into closed areas make sure that the room has sufficient clearances
and adequate ventilation, so that environmental operating conditions (up to 55 °C) are not
exceeded.
CoolSpot WM air-conditioning units have the same cooling technology (Direct Expansion) as the
Top Mount solutions. These unit's revolutionary design means that filters are not required, thus
reducing maintenance costs.
All CoolSpot WM air-conditioning units are equipped with standard electronic control boards to
ensure that the required temperature is accurately maintained. CoolSpot WM units can be easily
used with RAMOS to provide remote notification should the temperature inside the rack exceed
user-defined thresholds.
3
CoolSpot WallMount DX units are installed in lieu of rack side panels,
meaning there no limitation on overhead clearance.
These cooling units are compatible with
the following free-standing racks series:
PREMIUM Heavy RHF
PREMIUM Cabling RDF
PREMIUM Server RSF
OPTIMAL ROF and
OPTIMAL Flex RMF
CoolSpot WM units are ideally suited for spaces where there is insufficient
clearance to install a top mount solution. CoolSpot WM is available with
capacities ranging from 1.1 to 3.0 kW per cooling unit.
Up to two CoolSpot WM cooling units can be fitted to a rack for increase
capacity or redundancy purposes (optionally duty cycle balancing).
When installing these units into closed areas make sure that the room has sufficient clearances
and adequate ventilation, so that environmental operating conditions (up to 55 °C) are not
exceeded.
CoolSpot WM air-conditioning units have the same cooling technology (Direct Expansion) as the
Top Mount solutions. These unit's revolutionary design means that filters are not required, thus
reducing maintenance costs.
All CoolSpot WM air-conditioning units are equipped with standard electronic control boards to
ensure that the required temperature is accurately maintained. CoolSpot WM units can be easily
used with RAMOS to provide remote notification should the temperature inside the rack exceed
user-defined thresholds.
3
