Page 4 - CoolSpot DX & RAMOS
P. 4
The indoor CoolTeg DX unit with a highly effective evaporator inside
must be connected with an outdoor Mitsubishi condensing unit, which
will provide the “split” system with copper pipes and ecological refrigerant
R410A. The outdoor unit is equipped with frequency controlled compressor,
electronic expansion valve and other components. They come in various
capacities.
The cooling system design is limited by the distance between the indoor
and outdoor units, and their height differences (see detailed technical
documentation). Cooling is guaranteed for outdoor temperatures ranging
from -15 to +43° C. Used in conjunction with the outdoor Mitsubishi unit,
CoolTeg DX is a highly effective system
especially suitable for server rooms with a total
capacity of roughly up to 100 kW.
When a higher cooling capacity is needed,
a water system is probably more suitable solution.
The cooling capacity of each unit
can be changed, according to
individual requirements, by
compressor speed, opening the electronic expansion valve or by changing the fan´s speed.
If it is necessary to reduce the relative humidity, the dehumidification mode is activated
automatically.
CoolTeg DX units give you top-quality performance at reasonable rates and reduce your annual
energy consumption.
4
must be connected with an outdoor Mitsubishi condensing unit, which
will provide the “split” system with copper pipes and ecological refrigerant
R410A. The outdoor unit is equipped with frequency controlled compressor,
electronic expansion valve and other components. They come in various
capacities.
The cooling system design is limited by the distance between the indoor
and outdoor units, and their height differences (see detailed technical
documentation). Cooling is guaranteed for outdoor temperatures ranging
from -15 to +43° C. Used in conjunction with the outdoor Mitsubishi unit,
CoolTeg DX is a highly effective system
especially suitable for server rooms with a total
capacity of roughly up to 100 kW.
When a higher cooling capacity is needed,
a water system is probably more suitable solution.
The cooling capacity of each unit
can be changed, according to
individual requirements, by
compressor speed, opening the electronic expansion valve or by changing the fan´s speed.
If it is necessary to reduce the relative humidity, the dehumidification mode is activated
automatically.
CoolTeg DX units give you top-quality performance at reasonable rates and reduce your annual
energy consumption.
4
