Page 58 - Gibson W.B. "The complete guide to knots"
P. 58

50
                                      Sheet Bend

                                        This method of joining two ropes
                                      of different sizes is stronger than the
                                      commonly used Square Knot. It also
                                      can be used for tying ropes of the
                                      same size or two ends of a single rope.
                                        The tie is simplicity itself. Take a
                                      bight near the end of one rope and
       BIGHT                          hold it in position with the left thumb
                                      and fingers (fig. 1). The right hand
                                      grips the other rope end and throws a
                                      Half Hitch around the bight (fig. 2).
                                        Then, instead of tucking the loose
                                      end under the standing part of the
                                      rope, the right hand pushes it through
                                      the bight held by the left (fig. 3). Pull
                                      the ropes tight and the Sheet Bend is
                                      completed.




                   fig.  1






         THRU                HALF
                            HITCH'
        BIGHT



















                    fig. 2
                                                  fig. 3
   53   54   55   56   57   58   59   60   61   62   63