Page 416 - Buy Premium Tools ATORN Catalogue

Workpiece clamping
3-axis and 5-axis machine vices

Type description Screw-on jaws | Screw-on jaws for Stepped bars for Stepped bars for
large clamping narrow workpieces Screw-on grip jaws clipping on Screw-on grip jaws clipping on
width
Jaw width A (mm) 125 60 125 125 125 125
Jaw thickness Y (mm) 45 45 6.4 - 5 -
Jaw height C (mm) 15 15 39.5 15 19.5 35
Min. clamping width (mm) 75 7 5 10 39 10
Max. clamping width (mm) 228 156 70 166 160 166
250
Ident. No.
28741... Set price, € (O. R.) - - - - -
253
254
252
251
255
Ident. No.
28741... Price/pair, € - (O. R.) O. R. (O. R.) (O. R.) (O. R.)
Prod. group 280
3- and 5-axis machine vices
Clamping Technology
For 3 and 5-side machining in a single clamping set-up
High tensile force (up to 52 kN) which is not lost by bending. ƒ Clamps raw parts, machined parts, round and irregularly shaped parts
The low standard clamping depth of 8 mm enables improved and smooth ƒ Form-fit clamping without pre-stamping
5-sided machining. Clamping widths of any size can be set by moving the ƒ a 3 or 5 AX 100 can be mounted on T-slot plates and tables, on hole grid plates
two jaws. Width is only limited by the size of the machine table. and your own devices

The tensile force of 52 kN is generated where it is needed. This is achieved by ƒ Clamping jaws do not expand under load
the installation of a draw bar directly below the workpiece support. ƒ No clamping of machine table
ƒ Extreme rigidity allows maximum cutting forces

5 AX 100

3-axis machine vice, complete 3 AX 100 set
High pulling force up to 52 kN
Application: ƒ Clamping depth 3 mm with support strips, ref. no.
For clamping unmachined parts, machined parts, 28758 196
round and irregularly shaped parts.
Advantage:
Execution: ƒ Allows extremely high cutting forces thanks to
ƒ Movable and fixed clamping jaw extremely rigid design
ƒ Clamping width adjustable via extension shaft, scope of supply and services:
threaded spindle and spindle nut Supplied complete, without stop set
ƒ Form-fit clamping without pre-stamping
ƒ Any clamping width possible, restricted only by the
size of the machine table
Model Jaws width Groove width Clamp in Clamp in depth Min. clamping Max. clamping Tightening Tension force 28758...
(mm) (mm) height (mm) (mm) width (mm) width (mm) torque (Nm) (kN) ID no.
3 AX 100 100 14 100 8 22 440 120 22 014 O. R.
3 AX 100 100 18 100 8 22 440 120 22 016 O. R.
Set price, €
Prod. group 280

www.buypremiumtools.com 416